Jump to content
SAU Community

Rb26 Block With Cradle Suit Re-bore To 86.5

sebastion
 Share

Recommended Posts

sebastion Proficient

sebastion

Posted
Posted

hey guys we have the following parts:

RB26 O5U block with some slight scoring of a few cylinders, needs a re-bore to 86.5mm, comes with cradle $400 (no squirters) pick-up

RB26 crankshaft, not sure if its from 32 or 33, how long is the oil drive between the two? $150 pick-up

RB26 conrods, great condition comes with pistons and pins (3 pistons great, 3 with pitting) $160 posted

RB26 polished intake plenum $500 or $300 exchange, need a standard one for testing pick-up

RB26 polished twin turbo pipe $150 no longer needed due to upgrade posted

R33 GTR v-spec turbos with actuators (no shaft play) $400 pick-up

RB26 injectors with fuel rail and reg (16,000 genuine k's) and resistor pack $450 posted

located near Lismore NSW, can deliver up as far as brisbane.

prices are reasonably firm, we are in no hurry to sell. pics will be up soon, for the plenum and pipe, see our other topic

cheers

sebastion Proficient

sebastion

Posted
  • Author
Posted

Pm replied.

also just realised the typo in our topic, the bare block is $500 not $400, still plenty of meat left in it, still has a 86mm bore.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • PranK
      Blue slip

      By PranK · Posted

    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Dose Pipe Sutututu
      Blue slip

      By Dose Pipe Sutututu · Posted

      Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...