Jump to content
SAU Community

Recommended Posts

hey eric

doing the same thing as you actually.

After alot of research i found that you wont notice any difference between RDA and DBA on the street. The RDA are a softer disc so they will wear quicker, however, they are alot cheaper. As you would of seen on the rda group buy. So its probably best bang for buck if you went with the RDA discs. This, in the end, is what i chose and have just ordered with the RDA group buy batch 49.

I got told the best combo if what your doing is mainly street driving is RDA slotted with green stuff pad. Which is a less aggresive pad so it wont eat away at the rotors. They are more than capable of a few track days here and there. But if your after a tracked only car the you would have to go red/yellow which are made from harder compounds.

Just my 2cents

hope it help eric.

Price wise with slotted discs, DBA (something like $480 for fronts to suit my car) are close to twice as much as the RDA equivelent ($270 for fronts to suit my car). It's really up to you if you want to pay nearly twice as much for virtually the same product. $500 (for my car) is in Endless (slotted) front rotor territory imported from Japan.. so if you were willing to pay that much I would choose Endless over DBA.

i used the DBA series 4000 slotted rotors last year for track/street duty, and i had no problems, they dissipate their heat pretty well

as long as you don't use cross-drilled rotors, and over-heat them there's no problems

I did a brake upgrade with RDA slotted discs up front with green stuff pads and I think there pretty good. Ive had them for about two months now. Also worth doing is putting some good brake fluid, dot 5.1 is what I put. And I also put adr braided brake lines all round.

If you get the RDA slotted discs its probably better spending the extra money on the gold something discs coz there apparantly more rust resistant. Looks better under the rims.

DBA a few years ago, I had issues with them crazing. Now they seem to be better quality. Last set I used were 4000 slotted's with 400deg, then 500deg pads and they held up well on two trackdays as well as daily duties. Still A1 when I pulled em off. Pulled em off because I upgraded to a larger rotor setup.

RDA are good for street, but after seeing how they perform on a mates car, I wouldn't track day them.

Stay away from bendix ultimates, they chew your rotors a fair bit.

Stock nissan drilled discs I bought for $160 each from nissan were okay for light street duty, but cracked over time running ultimates, couldn't take the heat!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...