Jump to content
SAU Community

Recommended Posts

Hey all,

I recently changed my plugs to NGK Iridium's. I took it for a drive after they were put in and it went fine right thru the rev range.

About 20mins later i took off in 1st, change to second and nothing happened. I would have my foot down but there would be no power.

I take my foot off the gas for a few seconds then i can feel the power come back on and it is all fine again.

Sometimes when i am at idle the revs will rise to 1600rpm and stay there.

When i change into the next gear (usually into 2nd), is when it happens most of the time.. I can drive it on the highway and keep it at 100kmph (aprox 2900rpm)

It Seems like a boost leak, or something to to with the fuel. It was fine before i change the plugs.

All help is appreciated

new insight to my problem

when the car is playing up it wont hit boost.

I revved it to 5000rpm and the boost guage rose in vacume and came to a stop right on "0".

I can feel the car is about to stall so i put my foot on the gas and nothing happens... AT ALL! it just stalls.

If the car is cold it drives fine.

If the engine is warm but the car has been sitting for a while it is fine.

If the car and engine is warm it drives like a dog!

So when something on my car warms up.. it f@#ks up?

it was the plugs people.

NGK Iridium's

I put my old ones back in and it is all good now.. Just miss fires a bit, which is why i bought the Iridium's in the first place.

They came out with a build up of white crap on them? Does that mean im running to rich or lean?

And why would my car act like this with these plugs?

Try plugs at 0.8 and see how they go

can skylines be tuned to run better with better plugs?

I wasted that $120 so i think i will get them when i get my big service.

do you think that they overheated? Cuz they were fine for the first 5min of driving... Do you think that it wouldnt hit boost because the car could sence they were overheated, so it was like a safety thing.?

I agree wholy with WazR32GTsT A set of coppers are just as good the only reason I can see to use Iridiums is the life span, as it is a bitch to take RB spark plugs out and also puts stress on the coil pack connecters as they end up brittle and can break. They wont give you a performance gain. Coming into summer it wont hurt to put 1 heat range colder plugs in.

it was the plugs people.

NGK Iridium's

I put my old ones back in and it is all good now.. Just miss fires a bit, which is why i bought the Iridium's in the first place.

They came out with a build up of white crap on them? Does that mean im running to rich or lean?

And why would my car act like this with these plugs?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...