Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Ref the other Dyno thread.. thats how you convert it.. thats why I said what's shown on the dyno graph probably isn't relative to actual torque.. I think it's some sort of different measurement called "tractive effort".. You'll have to ask our resident dyno operators..

This was the First ever Shootout in Perth in Accredited shootout mode.We updated the weather conditions for every car using the weather station on the wall so your readings were very accurate and any body that thinks the readings were wrong can fax their graph to Dyno Dynamics and they can tell you every thing i did right or wrong by the details on the bottom of the page.

I garranty that this was the most accurate Dyno comp ever in Perth.

Awesome day well organized and run.

Couldnt help notice the two highest readings came from 4 cylinder cars.....hmmmm?(stir stir)

Maybe the six cylinder tractors can compete next time!

Damn I should have turned up :rofl: Just need maybe 1/2 a psi of boost to beat that 344hp :)

was a good day

congrats to john for his 299.5hp with his stock turbo'd soarer (not flowed either) only just beaten in 2.5 litre class by big turbo/external gate equipped r33 which beat him by like 3hp hehe

look forward to the next one

So when do we see the results!?

Yeah do we have a listing of yet of all the winners and power readings? or are we still waiting for the drug test to come through?

P.S Steve thanks for your help the other day! Sly running nicely now!

Will be in the next dyno comp!!

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...