Jump to content
SAU Community

Recommended Posts

Hi guys

Just an expression of interest wHether anyone would like to purchase the Brembo brakes of my 34 gtr number plate VSPC34 front and rear, will come complete with rotors, front are slotted rear are factory, calipers obviously, Have just installed EBC red ceramic brake pads in front and done about 200km since new. Rear pads still have heaps of meat left on them and also have a brand new set of EBC red ceramic pads rear. The pads cost me $650 for the front and rear and basically will go together with the whole kit.

Asking price $2500 the lot negotiable. These will be removed once my track brake kit comes in from Japan. These can be viewed right now on the car.

Also selling the factory 34 GTR seats. will be removed upon arrival of race seats.

Can also be viewed in car.

Asking price $2000 negotiable.

This is an expression of interest guys so please keep opinions to a minimum.

Photos of the car will be available tonight.

Anyone wants to talk price my number is 0402237825 name is George for those who dont know me.

Thanks in advance.

Edited by Adelaideprosound
Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/
Share on other sites

thats a really nice gtr mate, also you should have no worries selling the brakes at that price, lots of people chasing them at the moment... also the seats are well priced, and all look to be in good condition... where abouts are you located sorry mate (if you have already stated so)

cheers mate

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780438
Share on other sites

I am in Adelaide. I am happy to post interstate via Fastway couriers , and i would appreciate no low ball offers because you will only get decline. This is not a desperate sale. These parts are of a well looked after GTR.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780507
Share on other sites

  • 1 month later...

Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4891421
Share on other sites

Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4895815
Share on other sites

To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

bear in mind the difference in caliper mounting bolts. models prior to r34 use m12 bolts to mount the calipers, where r34's use m14. to fit r34 calipers to, say, an r32 or s14 etc you will either need to helicoil the calipers to take m12's or drill out the hubs to take m14's

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4900942
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...