Jump to content
SAU Community

My First Yellow

Blinky101

By Blinky101,
in Western Australia

 Share

Recommended Posts

Blinky101 Enthusiast

Blinky101

Posted
Posted

Just a random out there one.

I got my first yellow sticker today. I was driving very responsibly down the street when I got pulled over by a Highway Patrol. Apparently my Carbon Fibre bonnet is stronger than a regular car bonnet and it is a hazard to pedestrians when I hit them (like I aim for them or something). Apparently a regular bonnet gives a little when a body hits but a Carbon Fibre one won't. ???

Anyway, now I have 10 days to get it sorted and inspected, but I will be away from Monday for 9 days.

hmmm

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/
Share on other sites
2LV8ETR Mentor

2LV8ETR

Posted
Posted

If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4795918
Share on other sites
Nic_A31 Grand Master

Nic_A31

Posted
Posted
If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

CF is illegal because test dummies get decapitated, or mauled in crash tests

Technically you can get CF passed, but to do so, you need to provide some department with 5 CF bonnets to test out, and then its only passed for that specific vehicle, not every vehicle. The cost to get it legalized would be ugly, if you could actually manufacture CF to guarantee it to fold it set places like regular bonnets do.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796071
Share on other sites
Blinky101 Enthusiast

Blinky101

Posted
  • Author
Posted

Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796090
Share on other sites
urtwhistle Proficient

urtwhistle

Posted
Posted
Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

confirm it for WA not just QLD were they are based

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796100
Share on other sites
2LV8ETR Mentor

2LV8ETR

Posted
Posted
Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

The cops would give you a lickie for anything they wanted, permits or not.

Problem will always be unsolved until they are held accountable for handing out bullshit yellows.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796174
Share on other sites
Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted
That is an absolute farking joke when 4x4's drive around with great big steel GRATES bolted to the front of them.

Cops dare not anger the 4x4 soccer mums, everyone knows they shouldn't mess with a mob of angry house wives. :)

To the OP, did they yellow you for anything else other than the CF?

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797464
Share on other sites
Blinky101 Enthusiast

Blinky101

Posted
  • Author
Posted

The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797592
Share on other sites
markbrown Apprentice

markbrown

Posted
Posted
The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

let us know if you change your mind about the cf bonnet and decide to sell

cheers

mark

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4798301
Share on other sites
Blinky101 Enthusiast

Blinky101

Posted
  • Author
Posted

Ok Everybody

My final post for this thread.

My 33 went over the pits today and the results are in. The bonnet is good now that it's stock, BOV is good. Everything else is fine. My windows are over tinted so I need to remove the tint to pass and I need to rig my headlights so the low and high beam stay on together if I put on the high beam. HID's were never questioned.

The inspector took it for a drive and even made comment that it was one of the nicest and smoothest skylines he had ever driven.

Then he dropped the bomb. I have to complete an IM240 emissions test.

I will start a new topic post now titled IM240 Emissions Test. I will go through step by step whats happening so everyone else can be prepared if they ever encounter this dreadful test.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4801636
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...