Jump to content
SAU Community

Recommended Posts

Details:

Nissan 200SX S14 series 2 1998

Blacktop SR20DET with VCT, 5 spd manual

Genuine 180,XXX kms on it

Blue colour

Tinted Windows

JDM kouki front bar with fog lights

Jap 17"x8.5" and 17'x9.5' +15 all round

Carbin fiber bonnet

Engine:

Pod filter

Gready Front mount intercooler kit painted black all piping aswell

3 inch Turboback exhaust

Turbosmart duel stage manual boost controller set to 12psi and 15psi

Exedy Heavy Heavy duty brass button cluth around 500kms old

Dump pipe

Apexi Power FC tuner by RE customs making 202rwkw on hight boost and around 175rwkw on low boost(never reali go high boost as low is all you need)

R33 GTR fuel pump

Cusco 2way LSD

Suspension:

Kei Office front coilovers (9kg spring rate, 2way hight/damper and camber adjustable)

Tein Rear coilovers (8kg spring rate, damper adjustable)**waiting for luke fink to bring them down to me have king springs in rear atm :(**

Bad points

VCT chain is a little nosey re checked it said its all fine around the $500 mark to replace just havnt had time.

Selling as i have a ve ss as my daily and this is just sitting there picking up dust

Price: $12,000Quick sale (can bring price down if i remove some parts)

I am open to offers as long as they arent low ball offers.

Pics coming soon otherwise i can mms u if ur reali keen

0433663833

Link to comment
https://www.sau.com.au/forums/topic/286025-s14-series-2-1998/
Share on other sites

here some phone photos till i get time to bring in my diggy... lil dirty but u get that lol

wheel it comes with are the ones on the front of the car

post-34936-1251782146_thumb.jpg

post-34936-1251782175_thumb.jpg

post-34936-1251782396_thumb.jpg

Edited by evlgtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...