Jump to content
SAU Community

Recommended Posts

Details:

Nissan 200SX S14 series 2 1998

Blacktop SR20DET with VCT, 5 spd manual

Genuine 180,XXX kms on it

Blue colour

Tinted Windows

JDM kouki front bar with fog lights

Jap 17"x8.5" and 17'x9.5' +15 all round

Carbin fiber bonnet

Engine:

Pod filter

Gready Front mount intercooler kit painted black all piping aswell

3 inch Turboback exhaust

Turbosmart duel stage manual boost controller set to 12psi and 15psi

Exedy Heavy Heavy duty brass button cluth around 500kms old

Dump pipe

Apexi Power FC tuner by RE customs making 202rwkw on hight boost and around 175rwkw on low boost(never reali go high boost as low is all you need)

R33 GTR fuel pump

Cusco 2way LSD

Suspension:

Kei Office front coilovers (9kg spring rate, 2way hight/damper and camber adjustable)

Tein Rear coilovers (8kg spring rate, damper adjustable)**waiting for luke fink to bring them down to me have king springs in rear atm :(**

Bad points

VCT chain is a little nosey re checked it said its all fine around the $500 mark to replace just havnt had time.

Selling as i have a ve ss as my daily and this is just sitting there picking up dust

Price: $12,000Quick sale (can bring price down if i remove some parts)

I am open to offers as long as they arent low ball offers.

Pics coming soon otherwise i can mms u if ur reali keen

0433663833

Link to comment
https://www.sau.com.au/forums/topic/286025-s14-series-2-1998/
Share on other sites

here some phone photos till i get time to bring in my diggy... lil dirty but u get that lol

wheel it comes with are the ones on the front of the car

post-34936-1251782146_thumb.jpg

post-34936-1251782175_thumb.jpg

post-34936-1251782396_thumb.jpg

Edited by evlgtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
    • Welcome Adam. Car looks great!
    • "With a 1.5-WAY, the LSD is effective only during acceleration."
    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
×
×
  • Create New...