Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Stagea Autech Version

Kilometres: 68000

Transmission: Manual

Colour: Pearl White

Location: Newcastle, NSW

complies? N/A

RWC supplied? N/A

Currently registered? Yes

Price: $25,000 ONO

Contact: Via PM or 0412573463

Comments / Modifications: Defi boost gauge, Alpine head unit, k&n filter, splitfire coils, and Fujitsubo cat back exhaust. I also have a PWR intercooler that i may throw in depending on the price. Its a pretty standard car my wife drive to work every day. I am not looking for swaps as i need to the money to pay off my 4wd.

post-2317-1251779587_thumb.jpg

post-2317-1251779612_thumb.jpg

post-2317-1251779700_thumb.jpg

post-2317-1251779716_thumb.jpg

post-2317-1251779745_thumb.jpg

  • 2 months later...
  • 1 month later...

Hey guys & gals, need to try move this soon, i just fitted an exedy cushion button clutch and the recoed box a few weeks ago.

Anyone interested contact me on the above number.

The car now has 72500 kms

  • 1 month later...
  • 7 months later...

damn.... im in the market for one of these at the moment since i just sold my s13.

....but im just about to leave for the US for 5 months so holding off buying something till i return.

  • 1 month later...
  • 2 months later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...