Jump to content
SAU Community

Interest For Aftermarket Airboxes?

SkyHi_33

By SkyHi_33,
in South Australia

 Share

Recommended Posts

SkyHi_33 Mentor

SkyHi_33

Posted
  • Author
Posted

OK guys, well thanks a lot for the imput but if we could stay on topic for the one I'm getting made up I'd really apreciate it as i dont want to have to read through hundreds other posts to see who might be interested ;)

The design is finalized, just need to know if anyone else wants one for the same price so I can point you in the right direction as I don't think they will be the same price afterwards.

As for the heat soak, the material being used is heat treated and powdercoated which gives sufficient heat soak protection for what it is. If youre running a proper cold air pickup as you should, the difference in material is minimal when it comes to street car application. If youre building a race car then no, this probably isnt the best option but as a pod enclosure and heatshield on a street car its suitable, functional and pretty damn affordable.

Also, as mentioned before the people doing the work allow for custom laser etching/engraving or cut outs too (bit extra, still finding out pricing but wont be a lot) which is an option you don't get with other airboxes available.

I know that this will fit on an r33 for sure. Other models are a possibility, I would have to take a look under your bonnet but at this point id say it will most likely fit an r34, and rb25 stageas also.

If you are definitely interested, PM me and I will pass on the details and you can discuss it with the people making it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...