Jump to content
SAU Community

Recommended Posts

Hey guys,

Item: Cusco 1-way LSD (centre and 5 bolt half-shafts)

Condition: Very good, nice and toight

Price: $800 excluding postage

Comments: had it in the car for a few months and locks nice and tight but dont need it anymore.

Item: Bilstein and king spring shock combo - straight bolt in

Condition: very good

Price: $1000

Comments: comes already assembled with dust covers, just bolt in and enjoy the ride. nice and firm without jarring your back or bouncing around the road. would be a perfect road/track combo with some adjustable swaybars

Item: M-spec alloy radiator

Condition: good

Price: $250 excluding postage

Comments: had it in the car for about 6 months, noticed atleast a 5-10 degree drop in temp in hot summer traffic. no longer needed.

Pictures will be up in the next week or so, but if urgent please PM and ill see what i can do.

Also wrecking a R32 GTS-t, basically have everything for sale, PM parts that you want and ill shoot you a price.

Lastly, any questions feel free to PM

Very lastly, car located in the sutherland shire. postage, pick-up or drop-off available at the right price

Cheers

Stephen

Price for the whole car minus the running gear and interior etc etc.

Basicly wanting a Bare bones rolling shell with pannels and glass maybe a dash skin, dont mind if its smashed or whatever

Thanks Brad...

Edited by Risking
Did the diff come out of an R32 aswell?

yeah mate, diff came out of the R32 aswell

do you still have the high pressure power steering line from the r32 gts-t?

umm... not sure which one ur talking about. maybe point us in the direction of a picture or something

Price for the whole car minus the running gear and interior etc etc.

Basicly wanting a Bare bones rolling shell with pannels and glass maybe a dash skin, dont mind if its smashed or whatever

Thanks Brad...

PM sent

price of the crank angle sensor off the rb20 please thankyou, pm me

not looking at parting out the engine yet, will be looking at selling it complete in the near future

Mate, Do you have a VERY good condition Dash pad.

Cheers

will get pictures tonight for you to judge, no tears, however shrinking can be seen around the vents

I am keen on the diff as long as it fits to a ER34 GTT.

not too sure mate, i dont see why it shouldnt fit, im pretty sure the crown wheel sizes are the same and this comes with the half shafts which are 5 bolt. ill look into it in the mean time and let you know

not too sure mate, i dont see why it shouldnt fit, im pretty sure the crown wheel sizes are the same and this comes with the half shafts which are 5 bolt. ill look into it in the mean time and let you know

Yes please look at it, if it is bolt on i will take it :)

hey bud did your car have a sunroof at all? cheers

no sunroof mate

Yes please look at it, if it is bolt on i will take it :)

cant seem to find anything on it mate, both diffs being an r200 i dont see why not, but not sure. let me know

still lots of parts, got anything and everything, just shoot me PM on what you want

Front headlights (projector style) - 150 ea

Rear tail lights - 125 ea

Indicators - 100 ea

Boot lid - 150

Bonnet - 50

also

splitfire coil packs - 500

SF-DIS-001

great condition

K&N pod filter and adaptor (suit rb20) - 30

good condition

The flanges are with 5 bolts just like my GTT as i looked today...

But i need to be sure so i can buy it right now..

Edited by Akis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R32 pics Not sure if you can upload pics directly, but i've added them through an imgur link above.
    • There’s a possibility that Infinity G35x front hubs may be compatible, but it depends on the exact fitment. Sometimes, parts like hub and bearing assemblies from different models can work if the bolt patterns, bearing sizes, and axle specifications match, but the G35x hubs typically have a different design. It's worth checking detailed specs (like the number of bolt holes, size of the axle shaft, and bearing diameter) to compare, as Rock Auto does list some parts that cross over across different models. If you're going for a pre-pressed hub and bearing unit, that could be a good option. These units are usually easier to install, as the bearing and hub come pre-assembled, but you’ll still need to verify fitment, especially the outer diameter of the hub and bearing dimensions.
    • Love the input man! Defo gonna check it out
    • 1994 Series 3 R32 GTR. Freshly built as the perfect weekender. Has many brand new Nissan OEM pieces (some you can no longer source). Last serviced (April 2024) at V Spec Performance, Melbourne, Australia. Feel free to DM me if any questions. Asking price: $190,000 AUD.  Engine RB26DETT Original 05U block Factory R32 crankshaft CP 86.5mm forged pistons Spool forged rods Factory cylinder head – rebuilt Factory valve train Factory camshafts Factory inlet manifold Factory throttle body Garrett dash -5 turbos Custom intercooler piping with Plazmaman clamps Plazamaman 100mm race intercooler Turbosmart BOV Tomei fuel rail 660cc injectors Goodridge 9000 series fuel lines with crimped fittings Stainless steel front pipes Tomei titanium exhaust with stainless steel cat converter Spit fire coils Powder coated rocket covers New Nissan coil pack emblem badge Fully repainted engine bay in Factory Black Refurbished ABS unit New Nissan brake master cylinder New Nissan brake lines New Nissan clutch master cylinder New Nissan washer bottles Custom catch can (powder coated with Goodridge lines) Steering rack rebuilt New Nissan power steering lines New Nissan AC lines A/C compressor refurbished AC condenser refurbished HPI radiator and new thermos fanes New radiator fans NOTE: All nuts, bolts, fixings new or zinc coated Driveline Factory 5 speed gear box rebuilt Xtreme twin plate clutch Stainless steel clutch line Rebuilt factory transfer case Custom one-piece tail shaft Rebuilt factory front diff Rebuilt factory rear diff Suspension HICAS deleted Bilstein dampers IKEYA formular front and rear arms and tie rod ends New bushes wherever possible Whiteline anti roll bars (underneath car only) Brakes Brembo F50 front callipers – 4 piston AP racing 380*32 front rotors, J Hook design Custom floating hat and calliper mounts Brembo 4 piston rear callipers PFC pads Stainless steel braided brake lines Body New Factory Black paint job Ceramic coated exterior panels New Nissan aluminium bonnet (super rare) New Nissan headlights (super rare) New Nissan indicators New Nissan front bar New Nissan front lower lip New Nissan head light and bonnet seals New Nissan windscreen cowling New Nissan wiper arms and wiper blades New aftermarket windscreen New Nissan windscreen seal New Nissan front doors window surrounds and seals New Nissan rear quarter windows (must replace for proper paint job) New Nissan rear window surrounds and seals New Nissan side skirts New Nissan boot badges New Nismo rear bonnet lip New Nissan guard liners Interior New Nissan lens cover over cluster New Nissan gear boot shift New Nissan gear knob New Nismo steering wheel New Nismo floor mats New Billet Handbrake lever New Nissan OEM pocket facia to replace radio Underbody Original stone guard removed and new stone guard coating applied Powder coated front and rear cross members Fuel lines painted to match factory colours Fuel tank removed, cleaned, repainted and refitted All nuts and fixings cleaned, repaired and zinc plated Wheels Rays/Volk racing TE37 18 x 10.5 + 15 in Bronze Yokahama A050 265 x 35 x 18                         
×
×
  • Create New...