Jump to content
SAU Community

Recommended Posts

Entry forms here... http://www.sportingcarclubsa.org.au/Conten...0Sup%20Regs.pdf

I've sent mine off just for a bit of fun in the R31, something different to drifting and I might not hit any walls this time..

Link to comment
https://www.sau.com.au/forums/topic/288468-collingrove-hillclimb-come-n-try/
Share on other sites

Entry forms here... http://www.sportingcarclubsa.org.au/Conten...0Sup%20Regs.pdf

I've sent mine off just for a bit of fun in the R31, something different to drifting and I might not hit any walls this time..

watch the last few corners... seen a couple cars roll before.

watch the last few corners... seen a couple cars roll before.

cheers.

I did it once before when my car was basically standard and ran a 41.something.. a 38 would be killer this time since coilovers and double the kw :D

well that was exciting. tip for everyone else, take your 40kg trolley jack out of the boot before you go for a run up the hill. destroyed my rear 1/4's.

optherwise a good day was had. BoostdR was that you in the blue 323? was going to say hi but never saw you out of your car.

oh and 3rd gear skids.

IMGP5850.jpg

IMGP5888.jpg

IMGP5930.jpg

IMGP5931.jpg

i was in it last time was good fun. there today just watching. it pissed down a couple of times but was reasonably dry for alot of it.

btw. kev that last skid was killa!

tyson finished his car yet?

well that was exciting. tip for everyone else, take your 40kg trolley jack out of the boot before you go for a run up the hill. destroyed my rear 1/4's.

optherwise a good day was had. BoostdR was that you in the blue 323? was going to say hi but never saw you out of your car.

oh and 3rd gear skids.

:laugh: Yep that was me, sooo much fun. managed a 39sec run. Here is a couple

post-49288-1254035316_thumb.jpg

take your 40kg trolley jack out of the boot before you go for a run up the hill. destroyed my rear 1/4's.

How did they let you up there with that still in? The guy checking my car last time was that anal that he wanted me to take the spare tyre out even though it was firmly secured.

How did they let you up there with that still in? The guy checking my car last time was that anal that he wanted me to take the spare tyre out even though it was firmly secured.

i changed tyres between my runs, and wasnt going to carry my heavy-ass jack back to the pits from the burnout pad. so put it in the boot with intention to unload it back in the pits and forgot till it almost went through my rear 1/4 going around the wall.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...