Jump to content
SAU Community

Recommended Posts

its covered in the nissan service manual abs diag howto

it also covers basic diagnostics tips (even with consult) and what to check for

when was it working last (was it ever?)

i expect the main ABS unit which from memory could be part of the boot mounted computer

looks at wheel speed on each wheel, likely TPS and main vehicle speed i would assume

has anyone been hacking your loom? any inline hackers like SAFC? RSM? speed cutters etc?

these shouldnt affect it, but maybe someone has done a botched install and cut one of the ABS sensors

i would suggest

check wiring and main ABS control unit (under bonnet, left had passenger side at the front)

check all fuses and basic sensors from nissan consult (cable and software for sub $100 on the forums)

read the service manual for basic diagnostics

fialing that, goto nissan dealer and ask to fix but be prepared for $$$

if the light is on, your ABS is disabled

that is, if you are driving and lock up the brakes, ABS wont fire, and you will skid

when ABS is working the light is off, when you lock the brakes, the ABS unit fires a rapid pulse on the brake fluid line

this in turn allows the brake calipers to open/close rapidly, then is turn, removes the "skid" properties of the wheel and lets you gain control instead of lock and skid with no control

Link to comment
https://www.sau.com.au/forums/topic/288628-abs-light/#findComment-4835165
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...