Jump to content
SAU Community

Recommended Posts

Hi,

I am selling my skyline tommorow and the guy picking it up wont give the cheque until I give and sign the car over.

The guy is paying by a bank cheque, not a personall cheque. From my readings I understand a bank cheque is a cheque drawn on the bank and not on a individual. In order ot get a bank cheque the money must come out of the individuals account and move to the banks account. It is then drawn on by me (or my bank), and transfer is complete. Apparantly when I bank this cheque, they still take 3 days to clear the cheque.

I can speed this process up to 2 days for $15. My concern is should I sign over the vehicle registration papers and give him the car when I get the cheque?

I am very worried about this, despite readings that the cheques are safe.

I will however be holding his drivers licence and passport for the 3 days until the cheque clears.

ANy advice or responses would be greatly aprpeciated.

Link to comment
https://www.sau.com.au/forums/topic/28912-bank-cheques-please-help/
Share on other sites

Guest RedLineGTR

Bank cheques are money that is there in the banks account that has been transfered from the users account or a loan.They are usally stamped or something as well (not sure exactly). But with the signing over of the vechicle get him to come down to the Registration office with you while your changing car names over. Get him to take the cheque with him and ask for it before you sign your name or his for the transfer papers.

Yeah, bank cheques are very safe.

Just make sure you sight the cheque before you sign over the car.

Another good thing is that you have to get all his details to fill out the transfer of ownership so just ask to see his licence and take down all the details, including licence number. That way if in the unlikely event that something does go wrong you have the details. Just call up the cops, quote the lic number and name, address and rego on the car and all will be good. You can also follow up with the bank on the drawer of the cheque in the first place.

Nothing to worry about really

Bank cheques are money that is there in the banks account that has been transfered from the users account or a loan.They are usally stamped or something as well (not sure exactly). But with the signing over of the vechicle get him to come down to the Registration office with you while your changing car names over. Get him to take the cheque with him and ask for it before you sign your name or his for the transfer papers.

BE careful check with bank that issued cheque is valid (by phone when your customer is present) not STOLEN ,if theres any problem bank will tell you & so will customers face if something is dodgy

I once accepted building society cheque that bounced ..had to take st geo to court to get it but it was supposed to be Rock solid safe....but ST Geo had issued there cheque`s on a bank cheque that was deposited which later bounced because it was stolen....also note registration papers do prove title (ownership)

don`t give a receipt untill funds are cleared.

The best way to make sure is to be with the person buying the car when they make the bank cheque. I work in a bank, and almost every week we get security notices telling us that bank cheques have been lost or stolen from banks. Bank cheques can and have been forged easily, and there is still three working days on cheques. Especially be aware of CBA bank cheques stamped from Brighton Le Sands branch. There was a hold up last week, and there were many bank cheques and tellers date stamps taken.

The best way to make sure is to be with the person buying the car when they make the bank cheque. I work in a bank, and almost every week we get security notices telling us that bank cheques have been lost or stolen from banks. Bank cheques can and have been forged easily, and there is still three working days on cheques. Especially be aware of CBA bank cheques stamped from Brighton Le Sands branch. There was a hold up last week, and there were many bank cheques and tellers date stamps taken.

mundi, i to work at the CBA here down at Vic.

Bank Chq's are pretty safe and I make a chq for a purchase of a car about 20 times a week. Just pay the 15 bucks to clear it. Make sure bank chq is signed, if over 20k make sure it have 2 sigs on it from staff at the bank it was purchased from. Bank chq's cleared on the same day as deposit but after digital scanning and the magic that computers do our days, the banks decided to use 3 days to process the chq. When the bank chq is purchased it has a carbon copy, Mundi should know about this, we write down the name and account number of the person making the purchase. After the chq gets deposited it meets up with the Carbon copy in order for it to clear.

Yep, above is correct. Unfortunately someone i know has sold a motorbike and was paid via a stolen bank cheque. Apparently it was stolen out of bank cheque bulk storage by a staff member, so no one knew it was stolen until it was presented. The offender was caught and bike returned, but others might not be so lucky. Another way to cheque is to call the actual bank that made the bank cheque. Sometimes they can ring their respective department that handles them and can verify whether it is genuine or not. Unfortunately, not everyone these days is honest, and if would be bad for someone to lose an expensive car and only be left holding a piece of paper worth jack.

Yep, above is correct. Unfortunately someone i know has sold a motorbike and was paid via a stolen bank cheque. Apparently it was stolen out of bank cheque bulk storage by a staff member, so no one knew it was stolen until it was presented. The offender was caught and bike returned, but others might not be so lucky. Another way to cheque is to call the actual bank that made the bank cheque. Sometimes they can ring their respective department that handles them and can verify whether it is genuine or not. Unfortunately, not everyone these days is honest, and if would be bad for someone to lose an expensive car and only be left holding a piece of paper worth jack.

Thankyou to everyone who responded so quickly to my query. We are going to the bank together today (my bank) to deposit the cheque. I will also be taking and holding his drivers licence and valid passport for the 3 days till the cheque clears. I will be signing the registration papers this morning and will let him take the car. WHile I am at the bank I will ask for a "Special Answer". They will confirm the Cheque and the amount. Once I have the cheque in my hand, he can no longer cancel it apparantly without a police report saying it was lost or something. I am worried because $25,000 is a lot of money. Then again, when I bought my car from the dealer, he accepted the bank cheque, gave me the car and rego papers, and I was away. I hope and pray my experience today is the same and safe as well.

It feels so wierd driving my car today for the last time. Its very upsetting to go through, especially when I never wanted to sell my car, my house just had to come first.

Paul.

PS: I will also pay $15 or so to have the cheque clear quicker, like in 24-48 hours the bank lady said to me.

BE careful   check with bank that issued cheque is valid (by phone when your customer is present) not STOLEN ,if theres any problem bank will tell you & so will customers face if something is dodgy

I once accepted building society cheque that bounced ..had to take st geo to court to get it  but it was supposed to be  Rock solid safe....but ST Geo had issued there cheque`s on a bank cheque that was deposited which later bounced because it was stolen....also note registration papers do prove title (ownership)

don`t give a receipt untill funds are cleared.

I saw that on the internet about St George cheques. His is a ANZ cheque and no recent bulletins that ANZ bank cheques have been stolen.

Another thing, is we dicsused all this btw us for like a day, he is just as worried with me running off with his money, without a car.

I guess we are in the same boat.

Paul

I would arrange to do two things.

First go with the guy to your bank, and check with your bank manager that the check is genuine and o/k. Phone through first and make an appointment. If its o/k give the guy back his check.

Then both of you visit motor reg, and transfer the registration. He will then be sure you own the vehicle, and that side of things is o/k.

If you are still nervous about this, take a large friend along with you.

I would arrange to do two things.

First go with the guy to your bank, and check with your bank manager that the check is genuine and o/k. Phone through first and make an appointment. If its o/k give the guy back his check.

Then both of you visit motor reg, and transfer the registration. He will then be sure you own the vehicle, and that side of things is o/k.

If you are still nervous about this, take a large friend along with you.

Not a bad idea. :P

All is complete. We went to my bank, and they said, go to a CBA next to his bank (ie city). For a fee of $60 they walked the cheque to the bank, checked the signatures, validated it and then cleared it instantly at my bank. I went to ATM, checked funds were there, and gave him rego papers and keys. We were both happy.

I called Motor rego and lodged my side of the form on the phone so I no longer own that car. Its completely his, along with anyfines he may incurr after 10am.

Thanks everyone for your help.

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
×
×
  • Create New...