666DAN Posted December 2, 2003 Share Posted December 2, 2003 OK firstly if anyone has a picture of the stock GTR injectors....better still if anyone has a stuffed one they can send me Also a picture of the ports where the injectors sit on an RB25DET manifold. Would be greatly appreciated. Dan Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/ Share on other sites More sharing options...
MetBlue_GTST Posted December 2, 2003 Share Posted December 2, 2003 OK firstly if anyone has a picture of the stock GTR injectors....better still if anyone has a stuffed one they can send me Also a picture of the ports where the injectors sit on an RB25DET manifold. Would be greatly appreciated. Dan Here we go I don't have a standard manifold, but i do still have the stock runners in place... Hope that helps... Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-596527 Share on other sites More sharing options...
666DAN Posted December 3, 2003 Author Share Posted December 3, 2003 Thanks for that, confirms 100% why the hell my injectors don't fit Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-597113 Share on other sites More sharing options...
Skyrine-Dave Posted December 3, 2003 Share Posted December 3, 2003 ermm GTR injectors are top feed. Rb25 injectors are side feed Get an RB20 rail and adapt it. or just get one made... Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-597472 Share on other sites More sharing options...
JimX Posted December 3, 2003 Share Posted December 3, 2003 You'll still have problems because GTR injectors are low impedance and GTS-t injectors are high impedance. The best thing to do is return or sell the injectors, and then get the right type. Or at the very least buy high impedance injectors if you want to run a new fuel rail. That will cut out one of the headaches. Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-597667 Share on other sites More sharing options...
666DAN Posted December 4, 2003 Author Share Posted December 4, 2003 Yeah I was under the misconception that the RB25's were all side-feed too.....R34's are top feed only like the 32....found this out when checking the nismo site for injector upgrades.....my rail can take GTR injectors easy, the impedance isn't a problem if you use resistors. Anyone want to buy so GTS-t injectors & a rail? hahaha Dan Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-598587 Share on other sites More sharing options...
JimX Posted December 4, 2003 Share Posted December 4, 2003 Impedance may not be a problem if you use resistors, but wiring it all up is a bitch. You wanna make sure you do it properly too, because if you don't, you can probably say goodbye to the injector or hello to leaning out. Link to comment https://www.sau.com.au/forums/topic/28990-pictures-of-gtr-injectors-and-rb25-manifold/#findComment-598636 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now