Jump to content
SAU Community

Wtb: Autech Kit

Nic_A31
 Share

Recommended Posts

Nic_A31 Grand Master

Nic_A31

Posted
  • Author
Posted

Might try someone like Fibrevision, see if they can get it any quicker than a Monkey Warehouse (...i dont like the original URAS, would be too hard avoiding a yellow around here with that). Will let ya know :)

Link to comment
https://www.sau.com.au/forums/topic/290264-wtb-autech-kit/#findComment-4865347
Share on other sites
Nic_A31 Grand Master

Nic_A31

Posted
  • Author
Posted (edited)

LOL Im building, not buying my Ceffy

Still wanna brag?

EDIT: By the way, if you do find a kit, feel free to take it, if you find multiple's, do let me know...

FibreVision no longer exist as far as I know, I'll be placing an order with KYP I think, so let me know if you don't find anything, the guy is going back to Japan in December I think he said., and it takes about 3 weeks or so for the container to follow him back here (Im also order some other goodies like genuine Ceffy floormats and weather shield things)

Edited by Nic_A31
Link to comment
https://www.sau.com.au/forums/topic/290264-wtb-autech-kit/#findComment-4872573
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...