Jump to content
SAU Community

Recommended Posts

Update time guys:

----------------------------------------------------------------------------------------------------------

ECU's Sent To NIStune

- QWK32 - 19/10

- hibino - 21/10

----------------------------------------------------------------------------------------------------------

Second payment was sent this morning guys, so msports180, Stagea_Neo, canarygsr, stagman and SABBAi, give it a couple of days to clear, then you've got between then and early December to have your ECU's sent to Matt.

I need the email addresses of the following people:

- canarygsr

I also need a return address, car make and model, plus ECU serial number and part number from the following people:

- msports180

- SABBi

- darrinspencer

Sent ya a PM a few days ago with mine? If u didnt get it lemme know and i will resend.

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

sorry i haven't been around for a while guys. been pulling all-nighters to get a product finished and the internet connection here is shathouse (i've been doing some of this on my phone to give you an idea of how painful it is at home, lol).

I've just (begrudgingly :P) cleared out my pm's because my box was full. if anyone was trying to pm me and couldn't, please re-send :P

[email protected]

did he say how long until he sends out to the guys who are installing there own?

i've had a pm or two from guys asking when the daughterboards will be sent out to DIY'ers. has anyone received theirs? I've just emailed Matt asking how he's going with them.

Sent ya a PM a few days ago with mine? If u didnt get it lemme know and i will resend.

apologies, i do have it here :P cheers for the reply :)

Update:

----------------------------------------------------------------------------------------------------------

ECU's Sent To NIStune

- QWK32 - 19/10 - Received

- hibino - 21/10

- darrinspencer - 22/10

----------------------------------------------------------------------------------------------------------

I also need a return address, car make and model, plus ECU serial number and part number from the following people:

- SABBi

hey guys,

got an email from Matt last night. the daughterboard only orders are being posted out today :D

--------------------------------------------------------------------------------------------------------------------------

Can the following please PM me with details:

Stagea_Neo: i need your full (first and last) name for the software key.

SABBi: I still need your details mate.

JRM: I need your ecu serial and part number.

--------------------------------------------------------------------------------------------------------------------------

canarygsr: Matt needs the rom image from your ECU. i got a cc of the email he sent you, so have a look in your hotmail address.

hibino: your ecu is being posted back today.

cheers guys

josh

Edited by pyro-ns

Boards have been posted out this morning except for the two Stagea 23740-0V811 boards on the second group purchase which I'm chasing a ROM image for

Code 21: Ignition Signal

Code 26: Boost Pressure Sensor

Code 34: Knock Sensor

Code 43: Throttle Position Sensor

These codes are a result of running your ECU on my bench setup with not all the sensors connected at that time. Once you hit the 'clear DTC' button on the consult display they will go away :D

if i get the same CODE error issue's how can i solve that on my own ?

i think there might be away to reset them using the same method as checking codes buy bridging the two point on the consult connector. Link to Ecu Diagnostics

other options are, check to see if someone on the forums that lives near you and has consult cable and software can reset them for you. ring a few workshops near you, some will have some sort of OBD diagnostic scan tool and could reset them for you. or even some one with nistune software, i saw in there you can clear ecu codes, just like Matt said,

once you hit the 'clear DTC' button on the consult display they will go away

i've had no troubles and no error codes thrown since i reset them once i re-installed the ecu.

Hi Josh,

I've sent you a pm late last night with a recap of all my details.

Regards,

Pete :banana:

hey guys,

got an email from Matt last night. the daughterboard only orders are being posted out today :)

--------------------------------------------------------------------------------------------------------------------------

Can the following please PM me with details:

Stagea_Neo: i need your full (first and last) name for the software key.

SABBi: I still need your details mate.

JRM: I need your ecu serial and part number.

--------------------------------------------------------------------------------------------------------------------------

canarygsr: Matt needs the rom image from your ECU. i got a cc of the email he sent you, so have a look in your hotmail address.

hibino: your ecu is being posted back today.

cheers guys

josh

mine sent this morning, express. hope i get it back by the weekend. need to shift a house :S

is the car able to be driven with the errors showing up ?

lol, the whole house!! :D

my car still ran with the errors but i reset them straight away, so i dont know if the ecu went into any sort of safe mode/limp mode. if you get them try the diy way with bridging the two pins on the consult port, you bridge them once to bring up the error codes and bridge again to clear them. if not i'm sure you'll be able to find someone open to clear them for you, even a nissan dealership service centre will be able to do it.

Edited by QWK32

Update:

----------------------------------------------------------------------------------------------------------

ECU's Sent To NIStune

- QWK32 - 19/10 - Received

- hibino - 21/10

- darrinspencer - 22/10

- Stagea_Neo - 27/10

- RBPowaTJ - 27/10

----------------------------------------------------------------------------------------------------------

Daughterboard Orders Received

- stenve - 27/10

----------------------------------------------------------------------------------------------------------

I also need a return address, car make and model, plus ECU serial number and part number from the following people:

- SABBi

I need ECU Serial and part number from the following people:

- JRM

Hi Josh,

I've sent you a pm late last night with a recap of all my details.

Regards,

Pete :cool:

Received and passed on. Thanks mate :/

i never got an email ??

i've forwarded it on to [email protected] :D

I think they tried to deliver mine today. I got a letter in the mail saying to go to the post office to pick something up :)

I'll let you know.

don't ya hate that. then the bastards are never open when you have time off or anything.

also, can someone confirm this for me. to clear error codes, can't you just disconnect your battery for 5 mins or so?

Edited by pyro-ns
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...