Jump to content
SAU Community

Recommended Posts

today i was replacing my spark plugs and one of coilpack plastics plug broke leaving the pins bare. i connected it all back up and put something to split them apart. anyways some how i think the broken plug shorted out and my car didnt idle right and it stunk bad. i smelt the igniter and it seems the smell is coming from there. i was wanting to know what is the worst case scenario other than replacing the igniter could happen? really need some help here. freking out

Link to comment
https://www.sau.com.au/forums/topic/290450-help-please-guys/
Share on other sites

More details?

Bad smell?

Like unburnt fuel, or burning platic?

Not idling right?

Does the engine vibrate worse than normal when you raise the throttle ?

Coilpack looms often fail after 100'000km because the loom stiffens from excessive heat inside the valley, so there's a good chance you killed the loom while taking it off to get the sparks ?

As for further damage, try not to run the engine if its on 5 or less cylinders, fix the problem asap.

yeah it smelt like burnt wire thats bout it. i didnt drive it much just took it out of the workshop and drove it back. the car was vibrating heaps. i dont really think its the coils because before the new spark plugs they were still good. the exhaust sound sounded like there were little gaps that it stopped type of thing it wasnt like a free flow kind of sound. hope this helps. one of my mates thinks its the igniter because i didnt drive it heaps. o you reckon it couldve f**ked up that shorted coil too? and what bout the spark plug

The coilpacks fail around 100'000km anyway, for the same reason - excessive heat, but usually the loom goes, like I said, its stiff, and when you move it to get into the valley it cracks and breaks, so its probably the ignition/coil loom from the ignitor to the coilpacks.

As the car is idling, wriggle the connection on either side of the ignitor pack and see if it cuts out. If the ignitor pack is f**ked, it'll overheat and shutdown within about 60 seconds.

Try another loom, and if still no luck, to work out which coil isn't working, disconnect them one at a time, until disconnecting one doesn't make a difference when you rev it, that's the one that doesn't work, where as disconnecting a working one will cause worse vibrations since it'll run on 4 cylinders, instead of 5 as it is now.

Ignitor pack's dont cost much, neither do loom's, but looms can be hard to find since alot of people have the same problem.

If you need to upgrade coilpacks, go Splitfires, either eBay or SlidingPerformance (who also sell brand new ignition looms), JustJap, etc

You can sometimes find ventilated valley covers on eBay, or just run the engine without the cover, so it doesnt cook anything again.

you didn't happen to put the plug back on upside down?

and what did you use to hold the pins apart?

sounds like you have probably shorted something out like you said and that may have burnt out the ignitor (since you said that's where the smell is coming from). you may not have burnt out all channels on the ignitor and that's why the car will still run (just not on all cylinders)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...