Jump to content
SAU Community

Recommended Posts

Hi Team

Sadly my Bose audio system is dying and I am wanting to find a replacement, So I am wondering if anyone has replaced thiers with a Non-OEM and still have the old working Bose system laying around.

Its a long shot, but it would be nice if someone does not want their old system and can part with it.

Cheers, Oz

Link to comment
https://www.sau.com.au/forums/topic/290611-v35-bose-audio-system/
Share on other sites

I do indeed. what is dyng on yours?

Hi Chris

The cassette player does not engage when you push it in, push it in and no mechanical action at all.

What I want to do is get another unit send it to you to get the radio frequency changed to AU.

Then get an IPOD interface installed and remove the current MD player.

I know it all sounds silly but I prefer to keep my car as standard as possible.

Cheers, Oz

Hi siu_loong_bao

Thanks for the link.

I had a good look but only need the radio as I already have the MD player and sat nav.

Thanks for your response, Oz

Hi Chris

The cassette player does not engage when you push it in, push it in and no mechanical action at all.

What I want to do is get another unit send it to you to get the radio frequency changed to AU.

Then get an IPOD interface installed and remove the current MD player.

I know it all sounds silly but I prefer to keep my car as standard as possible.

Cheers, Oz

can do. I have a few spare tape mechs here that I kept from scrap units.

you are in brissy - give me a call.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...