Jump to content
SAU Community

Recommended Posts

Hey all

Selling the last of my GTR parts, All parts are in Adelaide

ITEM : BUILT RB28

CONDITION : ALL PARTS ARE BRAND NEW, WAS ASSEMBLED 3 MONTHS AGO BUT HAVE GONE BIGGER AND BETTER

INFO : WHERE TO START, FRESH LINED HONED AND BORED TO 86.5mm, ARP MAIN STUDS, ARP HEAD STUDS, CP CUSTOM PISTONS ( SUITED FOR HIGH BOOST, NOS, CRAZY HP ), CROWER RODS, RHEMAC CUSTOM 2.8LTR CRANK ( BASED ON THE NISMO CRANK ), NISMO MAIN AND ROD BEARINGS, ALL MACHINING WORK DONE BY RHEMAC'S HERE IN ADELAIDE.

PRICE : $8000 ( COST ME $8500 IN JUST PARTS + $3000 FOR MACHINING AND ASSEMBLY )

ITEM : JUN HI FLOW OIL PUMP

CONDITION : BRAND NEW NEVER USED

INFO : A MUST FOR ANY GTR!

PRICE : $1600 DELIVERED ( PAYED $1900 FOR IT PLUS DELIVERY )

ITEM : N1 WATER PUMP

CONDITION : BRAND NEW NEVER USED

INFO : EVERYONE KNOWS WHAT IT IS AND DOES

PRICE : $320 DELIVERED ( PAYED $395 PLUS DELIVERY FOR IT )

ITEM : TRUST PON CAMS - TYPE A FOR R34 GTR

CONDITION : BRAND NEW NEVER USED

INFO : THESE ARE GREAT, NO HEAD WORK NEEDED AND INCREASE TORQUE AND HP

PRICE : $900 ( PAYED $1240 FOR THESE PLUS DELIVERY )

ITEM : GTR SUMP

CONDITION : GOOD

INFO : DOES NOT INCLUDE FRONT DIFF

PRICE $300 ( PAYED $400 FROM WRECKER )

ITEM : 33 GTR COMPLETE HEAD

CONDITION : GREAT

INFO : CAME OFF A LOW KM 33 GTR, INCLUDES EVERYTHING A STANDARD HEAD HAS EXCEPT COVERS

PRICE : $900 INCLUDING BRAND NEW JJR ADJUSTABLE CAM GEARS ( PAYED $1000 FOR THE HEAD AND $300 FOR THE CAM GEARS )

ITEM : APEXI POWER INTAKE KIT 34 GTR

CONDITION : LIKE NEW WAS ONLY TRIAL FITTED

INFO : WE ALL KNOW WHAT THEY ARE

PRICE $ 350

ITEM : GENUINE HKS 25/40 TURBO'S

CONDITION : NEAR BRAND NEW ! WERE ONLY EVER BOLTED ONTO MY ENGINE AND STARTED BUT THEN DECIDED TO GO BIGGER SO HAVNT SEEN 1KM !!

INFO : THESE COST ME MEGA DOLLARS , THEY ARE 100% GENUINE HKS ! ALSO COME WITH HKS STAINLESS MANIFOLDS AND DUMPS

PRICE : $4500 DELIVERED ( THESE COST ME $6800 ! )

ITEM : STANDARD 33 GTR SUSPENSION

CONDITION : GOOD

INFO : WERE OFF MY OLD 33 GTR

PRICE : $300

Will add pictures tomorrow of everything

Happy to send parts interstate but at buyers cost !

If someone wants everything as a complete engine package will do a good price

Cheers all

Link to comment
https://www.sau.com.au/forums/topic/290730-top-quality-gtr-parts-for-sale/
Share on other sites

  • 2 weeks later...
No one want quality built parts any more?

hey mate, do you still have the N1 water pump for sale?

PM me your contact details

cheers

Edited by BIT SUS

Someone must want top quality parts at a bargain price? why rebuild your RB26 when you could have a RB28 ?

Pics are below of the RB28 !!!

Will do a good deal for someone wanting most of the parts i have for sale to build an awsome street engine. No reason why 450AWKW isnt achievable with this bottom end, turbo's and high end parts i have for sale at way below cost price !!

post-29615-1257776226_thumb.jpg

post-29615-1257776312_thumb.jpg

post-29615-1257776376_thumb.jpg

post-29615-1257776463_thumb.jpg

post-29615-1257776590_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...