Jump to content
SAU Community

Recommended Posts

I have a n/a r33 im buying a gtst engine to put in it and im Hunting down a Apexi pfc.

Ive found 1 brand new for $1300 delivered, here's the deal.

The guy/shop "From overseas" has told me when i buy it i get 12month manufacturer warrenty, so when i purchase it from him to keep the reciept

and if anything goes wrong to send it back to him with the receipt and he will forward it to apexi, who will look over it and make sure its not tampered with

and repair it for free of charge.

he also told me that the pfc only works with a manual rb25det r33 transmission's is this normal cause he said thats how they are?

but what im worried about is, should i buy it from this guy for $1300 and get this "apexi warrenty" or should i pay $2000 from aus?

IF something was faulty i know ide have to send it to him and so forth,

BUT

IF i bought it from AUS would i get a 12month straight up replacement warrenty or ide still have to ship it off to apexi?

btw he already told me the part # and i googled it and its the correct 1 for my model car.

Edited by Stealthynsa
Link to comment
https://www.sau.com.au/forums/topic/291191-some-power-fc-questions/
Share on other sites

Theres plenty of people selling 2nd hand ones here for that price or better why bother going from overseas, I wouldnt be to concerned with the warranty because I wouldnt expect to see it again for a long time if you sent it back to him and besides the ecus are high grade they are not known for breaking so my advice just pay 1100-1300 mark over here from someone

Theres plenty of people selling 2nd hand ones here for that price or better why bother going from overseas, I wouldnt be to concerned with the warranty because I wouldnt expect to see it again for a long time if you sent it back to him and besides the ecus are high grade they are not known for breaking so my advice just pay 1100-1300 mark over here from someone

:D

Theres plenty of people selling 2nd hand ones here for that price or better why bother going from overseas, I wouldnt be to concerned with the warranty because I wouldnt expect to see it again for a long time if you sent it back to him and besides the ecus are high grade they are not known for breaking so my advice just pay 1100-1300 mark over here from someone

yeah fair enough, ive tried looking on this forum everynight for the past 2 weeks now and i can find 1 that hasnt already been sold...

i dont need the commander... only the pfc but if 1 comes along with both ide still take it.

would u buy it from overseas though cause it is new?

if i got it from someone on here i wouldnt get any warrenty at all,

so as u said they dont brake so wouldnt it be fine to buy it from him and not worry about the warrenty?

but if someone knows somebody who is selling one could u please pm me otherwise im going to have to buy from this overseas dude...

i just dont wanna get left with some peice of poop :rant:

Someone that is overseas is not bound to honour any warranty at all.

Given they are not under Australian law

yeah i didnt think so, but he said on any brand new apexi product u get your manufacturers warrenty so it is apexi who would be giving the warrenty or am i missing something here?

cause i was just about to buy it since i thought ill get a brand new 1 from overseas with or without warrenty ( cause its new ) for $1300 delivered

or

get a second hand 1 from joe blow in aus for $1300 with no warrenty aswell?

what do u think cause im tossing up which 1 to do... ive asked a few friends and its pretty much even but

you guys on here would have more experience then them so please give me your thoughts on what to do

If your just after the ecu without the controller youll find people here selling for 1000, its true it took me a few goes before I found one they get sold pretty quick , I would just avoid overseas with things like this becuase if it doesnt work in the start when you get it youll have a headache , if it was me I would want to buy from someone where I could go pick it up off them so if something does play up you know exactly who you dealt with, I bought mine off a guy off here and went to hes house picked it up he wrote me a recipt and it was fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...