Jump to content
SAU Community

Recommended Posts

I've been thinking maybe i want some eyelids for my car but not sure about the ones on ebay. I like the look of these ones (attached) but never seen them for sale anywhere...can someone help me out on where to find these or does someone make them perhaps. I really like the fact they go to the bottom corner of the light and not just straight across.

Thanks

NSR33400RF.jpg

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/
Share on other sites

the only thing i don't like about the ebay ones is they make it the car look 'sleepy' where as these have a more of an agression look to them. but this is not the only car i have seen them in other photos, what would be involved in making a set?

BlackR33Eyelids.jpg

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4876408
Share on other sites

MyGTR.jpg

I have these that I have taken off and are lying around. Obviously they are silver made of fiberglass and can be attached with silastic.

I know they are not exactly what your after but PM me if your interested in them and we can arrange something.

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4876727
Share on other sites

i want them because the top of my headlights are slightly damaged, and this would cover them, i have the same front kit as that GTR and looking at getting a vented bonnet. I'm trying to make the car look different cuz too many ppl do the same thing.

I agree with all bout making the car look clean as i am very fussy with what i put on my car. No stickers, none of this black and white 2 tone. If it looks off then it won't be going in/on the car.

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4882246
Share on other sites

Ok, well I've been working on a kind of Eye-lid project for a few weeks on my 33 GTR. I don't mind the front of the headlights but just think the sides don't look as good as say the R34 or silvia/s200 headlamps because the sides just droop down.

Since the R33 sides are so big, I thought OK I will make some "Side Lids" to reshape.

After lots of paint issues getting paint to stick to aluminum, here is one side done. I have to say it didn't turn out the way I thought it would when I visualised it in my mind. So I'm looking for honest critique here. Does it make them look better or does it just make me look like a tool trying too hard. Be honest, I can take it.

post-16200-1255846189_thumb.jpg post-16200-1255846220_thumb.jpg post-16200-1255846267_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4886407
Share on other sites

the only thing i don't like about the ebay ones is they make it the car look 'sleepy' where as these have a more of an agression look to them. but this is not the only car i have seen them in other photos, what would be involved in making a set?

not really much involved, glad wrap a headlight and apply the fibreglass to it. let it dry off and then take them off the headlight. final shape them with a grinder and paint to suit ur car.

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4886579
Share on other sites

Not a bad attempt. But it looks like something that belongs more on a prelude/civic/lancer... My GTR is almost identical and it had the normal eyelids on it when I got it, but after sanding back and cleaning up the headlights from yellow haze it looked alot better with them off. Good work at having a go though.

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4886580
Share on other sites

Yeah, well I pulled it off this morning before I drove to work. Thought I'd look at it with a fresh outlook in the morning and well - it just doesn't give the effect I wanted.

Maybe will try some angel eye highlights instead.

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4888224
Share on other sites

  • 2 weeks later...

its a matter of personal preferance i guess. i got them to be different as i havent seen one getting around my area with them. im fitting them when i repaint the car to give it a while new look. mine dont go the whole way down the side of the light i think they look lame mine just go back to the edge to a point

so if you like them really does it matter about others opinions?

Link to comment
https://www.sau.com.au/forums/topic/291422-eyelids/#findComment-4914309
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...