Jump to content
SAU Community

Recommended Posts

during briefing you are taught correct driving line, braking points, seating position, hand position and a few other handy tips. then u got about 3 1/2 hours out there on the skid pan to put it into practice over a few different track setups, there is a instructor the whole time who will come in the car with u a few times give you ongoing tips through out the day and even drive your car around to show you how it should be done

sorry guys all full now

Myself

alix

2lv8etr

v8eater

mark

jordan

dan

nik

cr8z

char

thanks for all the interest i am sure i will be running another one very soon with WCC so ill post up when i have some dates sorted

few of us meeting at caltex servo kelvin rd maddington @ 7.30am for a 7.40 leave to then meet there for 8am.

cameras? hrmm maybe i should have cleaned my car sometime this year.

I'll be there. :-) Great idea to cruise there!

wicked day guys, had an absalute blast. but now i need new brake pads and i need to change me brake fluid lol.

loved the skids at the end Brendon! and POST UP THEM VIDS!!!

Yeh guys, great day! Had a blast! Can't wait too see some pics or vids.

thanks to all the guys who came and had a ball i think i got about half way through my rubber and a few hits to the head with the car flicking around but yeah i think i will start planning our next 1 asap

Awesome day guys. A day to really test ya car control skills. It was tops.

Tyres are pritty well fried now but hey, ive got a smile on my face that i cant remove. A must do again soon.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...