Jump to content
SAU Community

Std Rb25det Rebuild

kyle785

By kyle785,
in Engines & Forced Induction

 Share

Recommended Posts

msnismo Grand Master

msnismo

Posted
Posted

perhaps try CP, Arias etc... someone will have some available. I thought ACL did em as they used to have a listing for em.

You may have to adjust the size but it will be cheaper than Nissan OEM

You have the ring sizes obviously?? Just ring around and see if you can get a match...

PRO_32 Proficient

PRO_32

Posted
Posted

Good luck finding aftermarket unless things have changed recently (last two weeks) you can do the ring around and waste your time or you can jjus order genuine nssan rings which btw are cheaper than aftermarket anyway,

Will be 5 to 10 days from japan think last time I paid 280.

Btw standard size is 86mm x 1.2 , 1.5 , 2.8

Hope that helps.

Mandingo Proficient

Mandingo

Posted
Posted
I would use the factory rings if you are keeping the standard original pistons.

Your piston to bore clearances are going to be all whack anyway so there is no need to overcomplicate the process.

  • 2 weeks later...
putraged Rising Star

putraged

Posted
Posted

does anybody know the price comparison for aftermarket rings & OEM rings? i got std size bore forgies going on rebuild next week.

can i use my previous rings? its just 50.000 kms with normal boost anyway, any risk of re-use it?

and also, anybody knows the part number for OEM head stud & main stud for RB25det neo? i've been looking for it, but got no clue at all.

any inputs will be greatly appreciated.

thanks

The Dan Grand Master

The Dan

Posted
Posted
does anybody know the price comparison for aftermarket rings & OEM rings? i got std size bore forgies going on rebuild next week.

can i use my previous rings? its just 50.000 kms with normal boost anyway, any risk of re-use it?

and also, anybody knows the part number for OEM head stud & main stud for RB25det neo? i've been looking for it, but got no clue at all.

any inputs will be greatly appreciated.

thanks

Don't use your old rings. You probably shouldn't be going standard bore either but if it'll hone up to an accurate piston to bore clearance then it'll be ok. Just never seen one come out perfect after 50k though.

Chances are the old rings won't fit the new pistons

Chances are the new pistons come with rings anyway so why would you even consider it?

They don't have studs, they use bolts from factory and Nissan can help you with them.

If you get stuck for a part number and need help ring 07 32907890 and ask for Alan or Joel

The Dan Grand Master

The Dan

Posted
Posted
i have a good faith on my rb25 though. :D:thumbsup:

my forgies are used, so not including rings. anybody know how much set ACL rings cost u?

thanks for the help daniel, i'll call them tomorrow.

ACL Rings cost about $165 a set and can be had from any Repco, Autobarn or other parts stores.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      At first I thought these were knock offs....

      By soviet_merlin · Posted

      Every time I have to buy new tyres I question what actual difference it makes between running $40 tyres and $300 tyres and whether it's worth it. Because that's a massive difference to the wallet. But then I did go to a driving training at some point which also included emergency braking and swerving in the wet. In part I think it was meant to show people how bad it gets. Funnily enough what I took away from it is that I can go much harder than I thought in my car. I presume mostly because of decent tyres. Some of the other cars there were shocking to behold. And a bit scary that cheap tyres are probably a lot more common on the road than decent ones  
    • Duncan
      At first I thought these were knock offs....

      By Duncan · Posted

      I'm pretty sure that is just straight AI generated word soup, where did you receive that ad (facebook)? They misspell Pirelli twice, no human eyes looked at that before it was posted. Incidentally, I am running the chinese pirellis on my V37 and they are.....OK....I didn't go looking for them, they were just what the shop had in stock in the tall size that car needs. LIke any brand, you really can't trust the brand's reputation to apply to every product they produce. Pirelli make good and crap tyres, all with the same logo stamped on them, and all with an attempt at price premium due to the brand
    • luke gtr
      At first I thought these were knock offs....

      By luke gtr · Posted

      New temu brand?
    • luke gtr
      New Stegea Owner

      By luke gtr · Posted

      Welcome.  It's unfortunate,  but a lot of these vehicles just haven't had regular and thorough maintenance for a long while. Once its back up to scratch, it should provide fun and fairly trouble free motoring.  Keep us updated with what you're doing with it.
    • thomasLait
      New Stegea Owner

      By thomasLait · Posted

      Ya thankfully I've been able to drive it, it's pretty fun however I noticed yesterday while driving to work that my left side of the car is very wobbly, like any bump I go over it jolts the whole vehicle and pulls the steering wheel, I kicked the wheel a few times once I got home and it's a very distinct metal on metal clunk, so I guess I need to take a look at my suspension, maybe it's a control arm bushing or tie rod 
×
×
  • Create New...