Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

R32 GTS.T wheels go alright on a GT-R while I get mine repainted yeah? I'm 90% sure caliper clearance wont be an issue being that my car doesn't have the Brembo's

you may have to run slip on spacers on the front, because GTS-T rims on a GTS-T have about 4mm caliper clearance...

lil help, just took the gtr to work and was running fine.

till i tried to put my foot down just the slightest bit and i it didnt wanna boost, was nearly at work so i kept going and yeah it didnt wanna go above 3k. i had it in first has i pulled into the car park and was sitting around the 3k mark seeing if it would go over and it gave the loudest back fire ive heard outa that exhaust. im assuming the extra fuel i was dumping in built up. all the temps seemed fine. it also stalled while i was looking under the bonet after sitting at low rpm for a while.

almost seems like a intercooler hose has come off like once before, had a quick look when i come in but seems to be alright uptop, im going to head out there and jack it up at lunch and try n have a good look at those intercooler hoses.

is there anything else i should be checking? maybe split hoses or something.

damn cars

Edited by Inline 6
you may have to run slip on spacers on the front, because GTS-T rims on a GTS-T have about 4mm caliper clearance...

Ive got gts t rims on my gtr at the moment cause i had to go through regency and they fit fine no spacer required...

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

when you get the cat you bought of ebay installed right mikey ;)

Edited by Inline 6
lil help, just took the gtr to work and was running fine.

till i tried to put my foot down just the slightest bit and i it didnt wanna boost, was nearly at work so i kept going and yeah it didnt wanna go above 3k. i had it in first has i pulled into the car park and was sitting around the 3k mark seeing if it would go over and it gave the loudest back fire ive heard outa that exhaust. im assuming the extra fuel i was dumping in built up. all the temps seemed fine. it also stalled while i was looking under the bonet after sitting at low rpm for a while.

almost seems like a intercooler hose has come off like once before, had a quick look when i come in but seems to be alright uptop, im going to head out there and jack it up at lunch and try n have a good look at those intercooler hoses.

is there anything else i should be checking? maybe split hoses or something.

damn cars

+1 for a cooler joins. Was it pufing abit of black smoke too?

Ive got gts t rims on my gtr at the moment cause i had to go through regency and they fit fine no spacer required...

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

No worries brother, just make sure you send me a text or something before you come over just so I can 100% make sure I am home. Congrats for getting off defect with little fuck around ;)

No worries brother, just make sure you send me a text or something before you come over just so I can 100% make sure I am home. Congrats for getting off defect with little fuck around :banana:

Yeah i'll text ya during the day once i have finished with the car.

Yeah the guy at the lonsdale depo was pretty cool was in and out in 20mins....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...