Jump to content
SAU Community

Recommended Posts

Yeah no shit hey. Trying to find out about catch can setups/ oil mods for some piece of mind and just when I get some useful info someone two posts down trashes it.

All I want is a lightly tuned reliable GTR.

  • Oil mods like which catch can, relocator and oil cooler
  • Front pipes (No I'm not going to AM Performance
  • Pods or panel filters
  • clutch, ebc, injectors, cams, fuel pumps.

Too many options, too many chances of buying a brand thats not going to work well.

It's simple, there's ASSLOADS of recommendations out there. Easiest way to pick what works, go to the RB26 dyno thread, compile a part list, work from there. That way you know what works and what doesn't.

As for your list...

[*]Oil mods like which catch can, relocator and oil cooler - JJR Autech catchcans are the trick, simple, cheap, easy

[*]Front pipes (No I'm not going to AM Performance) - If you're not going to listen to heaps of people recommending you see Andrew, I won't answer this, he is cheap, does quality work and his service is second to none

[*]Pods or panel filters - Standard air box is good for 400atw, it also lets a shitload more cold air in through the air guide, do the math

[*]clutch, ebc, injectors, cams, fuel pumps - Clutch; a nice twin is my opinion but that's personal preference. EBC; anything like the Profec B or the Blitz SBC. Injectors; 700cc Sards, straight drop in, easy as (although not needed if keeping standard tubos). Cams; not needed. Fuel pump; I prefer the Nismo for straight drop in but you can get by with an 044 or 040 Bosch

There you have it, a nice, easy, reliable part list.

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Actually gets a bit chilly sitting around in datacenters/server rooms, now if only IBM graced us with variable fan controls.

... Glad I don't have to go into the server-room actually .. bloody freezing in there :P

[*]Front pipes (No I'm not going to AM Performance) - If you're not going to listen to heaps of people recommending you see Andrew, I won't answer this, he is cheap, does quality work and his service is second to none.

+fkn1. bit of a no brainer really. dude does quality work for not much more than you can get cheap chinese shit for. and a helluva lot cheaper than some other 'professional' exhaust places that take the cheapest possible options and then charge you top dollar.

^^^ do you really need to change front pipe? Mine made 326kw at wheels with the stock one...

Possibly no, however I'm one for as little restriction as possible and if you've ever seen the pissy stock ones, they are restrictive (especially the 32GTR ones). I definitely noticed a positive effect when I got my dumps fitted, came on boost a little earlier and sounded a lot better. I know for a fact on Steve's car that changing his increased his boost by 4psi instantly, less restriction, more flow. A total whore of a job to fit them on a 26 but hey, nothing on a 26 is easy.

It comes down to how far you want to go/how much you want to spend on your car.

Possibly no, however I'm one for as little restriction as possible and if you've ever seen the pissy stock ones, they are restrictive (especially the 32GTR ones). I definitely noticed a positive effect when I got my dumps fitted, came on boost a little earlier and sounded a lot better. I know for a fact on Steve's car that changing his increased his boost by 4psi instantly, less restriction, more flow. A total whore of a job to fit them on a 26 but hey, nothing on a 26 is easy.

It comes down to how far you want to go/how much you want to spend on your car.

Spark plugs :thumbsup:

Never really understood that design but then again I suppose it's necessary to accommodate for the SMIC

ideally , i want to get a forward facing plenum because i HATE the stock 25 style plenum but thats wasted money with stock power /nod

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...