Jump to content
SAU Community

Recommended Posts

yeah the getz will be big nuff to fit it, i mean, i have fit in a washing machine, a four foot fish tank, an arm chair etc etc

i just dont want to dissassemble if dean would rather not

its only 2 bolts on each leg , then 2 bolts holding the hydraulic then 2 bolts holding the arms

narrrrshing strenuous ;D

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Whats a 5stud conversion to a S13 worth? 2nd hand brand new parts whatever,

Cheapest would be bestest for me though wink.gif.

The cheapest route is to get some skyline rear hubs and drive shafts (with the same bolt pattern as your diff ideally) should cost around the $250 mark; and then get some conversion hubs for the front online, these are how i'm getting my conversion hubs from (go the Aussie dollar).

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

$500 from me :/

Only the rear hubs are any good for a 5 stud conversion. S-Series run a McPherson strut front suspension and the skylines runs a double wishbone front end so they aren't interchangeable.

I shall be chasing a CA 5spd conversion soon aswell smile.gif

Just buy my CA 180, it's making 217rwkw ATM and in the next 3 weeks it'll be making at least 235rwkw once i fit the cams i picked up a while ago.

Waynes getting his for like $3k

That's what i was going to sell mine for

Oh well since he has one already organised i guess I'll keep mine for a little bit longer.

EDIT!!

When did i get 1000 posts.

Edited by D_Stirls
The cheapest route is to get some skyline rear hubs and drive shafts (with the same bolt pattern as your diff ideally) should cost around the $250 mark; and then get some conversion hubs for the front online, these are how i'm getting my conversion hubs from (go the Aussie dollar).

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

Only the rear hubs are any good for a 5 stud conversion. S-Series run a McPherson strut front suspension and the skylines runs a double wishbone front end so they aren't interchangeable.

i used s14 front and rear hubs. s14 front lower control arms, and r33 front and rear rotors and calipers. a few years ago that was around $1500 with brand new brake pads.

if u go s14 front and rear rotors and calipers instead of 33. u may be able to get the total cost around $600.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...