Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

you'll need the z32 after you hit 300kw tho... or go for the more expensive nismo afm

speaking of z32s, wheres the cheapest place to get em from, with the plug?

-D

From what i know about the Nismo AFM's the Z32's will still out flow them. Like you said the nismos are more expensive and really the only advantage is that they are 60mm (which is why the Z32 out flow them). A mate of mine just fitted some Z32's to his 33 GTR and with a bit of heat you can stretch the factory intake pipes over the bigger Z32's anyway.

what did the pressure one set you back ?

I honestly cant remember, over $100 iirc but I cant recally precisely how much. it also depends on how many addons u need

i had to get a couple of fittings since I was mating the VDO gauge to an omori plug (as the omori gauge had failed a long time before i got the car) so it cost me a little extra.

VDO are probably the best mechanical gauges on the market. If you want electronic then some of the jap brands will suit you well, but the VDO's are made by siemens germany (who incidentally made my injectors) and so I can give them two thumbs up

Accurate as hell.

-D

From what i know about the Nismo AFM's the Z32's will still out flow them. Like you said the nismos are more expensive and really the only advantage is that they are 60mm (which is why the Z32 out flow them). A mate of mine just fitted some Z32's to his 33 GTR and with a bit of heat you can stretch the factory intake pipes over the bigger Z32's anyway.

thats very true, the bigger diameter of the z32 is a great performance advantage, however its a blatant regency no-no...

the nismo is a little more stealthy but probably just as illegal as the z32

so yeah, ill be going for the z32, maybe I can get it engineered. i imagine it can be, as one is only making the inlet diameter wider and putting in a more accurate afm....

then again, this is rannistan

allahu kabana

-D

its a emissions item so they aren't going to like engineering it. Also i don't think that is the emissions testing equipment in SA that is suitable to fully test a new tune. The emission test they make us do is basically testing that you have all the factory gear working correctly they then just rely on the factory tune meeting the standards that it is supposed to.

when i get my 25 conversion engineered i'll be going interstate anyway (even though i don't need a full emissions test) because it'll cost 20% of what it'd cost to get it done here.

Edited by D_Stirls
its a emissions item so they aren't going to like engineering it. Also i don't think that is the emissions testing equipment in SA that is suitable to fully test a new tune. The emission test they make us do is basically testing that you have all the factory gear working correctly they then just rely on the factory tune meeting the standards that it is supposed to.

when i get my 25 conversion engineered i'll be going interstate anyway (even though i don't need a full emissions test) because it'll cost 20% of what it'd cost to get it done here.

mm that bites...

thats the sorta thing that would be kinda fun to challenge in court (if one was very wealthy) - the failure of the govt to provide adequate testing equipment as well as the stupidity of trying to enforce laws that they have no means of testing accurately. If it wouldnt cost so much money, it'd be a worthy waste of time.. (even representing yourself, court can cost a lot unfortunately)

-D

I honestly cant remember, over $100 iirc but I cant recally precisely how much. it also depends on how many addons u need

i had to get a couple of fittings since I was mating the VDO gauge to an omori plug (as the omori gauge had failed a long time before i got the car) so it cost me a little extra.

VDO are probably the best mechanical gauges on the market. If you want electronic then some of the jap brands will suit you well, but the VDO's are made by siemens germany (who incidentally made my injectors) and so I can give them two thumbs up

Accurate as hell.

-D

yeah i remember you saying on msn about the injectors

i wonder what id need to hook it up :happy:

seeing as i dont have a compression sender at all :s

It is officially 1 year since my good friend in Dimitirious Ninos passed away in that accident on Taplies hill rd and the high speed collision with the stoby pole in that silver WRX.

Still finding it hard to accept.

It is officially 1 year since my good friend in Dimitirious Ninos passed away in that accident on Taplies hill rd and the high speed collision with the stoby pole in that silver WRX.

Still finding it hard to accept.

Far out, a year already!!?!?!?

RIP mate

It is officially 1 year since my good friend in Dimitirious Ninos passed away in that accident on Taplies hill rd and the high speed collision with the stoby pole in that silver WRX.

Still finding it hard to accept.

Sorry to hear mate. May I ask, was that the crash that involved another WRX?

My now-ex mate, Corey, was involved in one of the high speed crashes. He was driving a Green or Blue WRX, was racing another car (pretty sure it was a rex). The other car had fatally crashed either into a pole or a tree, but Corey being a complete prick, didn't stop to render assistance, instead he just drove away fully knowing that the other car had crashed.

He got caught soon after and was arrested for it. He's currently facing court but I'm unaware of the outcome - but jail time is on the cards.

I still cannot believe he didn't simply pull over to provide assistance, but instead did the selfish thing and left the scene. Since then, I haven't spoken to him and neither have my mates... we all disowned him.

He was in the paper a few months back (front page) but would love to know the outcome in court. It was only a matter of time before something like this happend. He would race any car out on the streets at any oppurtunity and never seemed to learn his lesson.

you'll need the z32 after you hit 300kw tho... or go for the more expensive nismo afm

speaking of z32s, wheres the cheapest place to get em from, with the plug?

-D

Keep your eye out on the for sale threads Ben....i got mine off a sauer and got it really cheaply $200 second hand with the plug

It is officially 1 year since my good friend in Dimitirious Ninos passed away in that accident on Taplies hill rd and the high speed collision with the stoby pole in that silver WRX.

Still finding it hard to accept.

condolences mate

My pinky finger after a small incident on the mtb last night.... managed to only to this and a tiny scratch on ankle... managed to run it out WTF? Ill admit ive "learnt" to crash after all these years of racing mtb nationals ect ect...

5 local anesthetics and a scrubbing brush to get all the shit out what fun!

11641_1253201325207_1084756809_30799635_3392401_n.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...