Jump to content
SAU Community

Recommended Posts

Just thought I'd tell you guys of a fcouple of things I've found out about my R34 over the course of owning it.

The tiptronic gearbox in the non-turbo is the same unit as the turbo one has! I'm guessing due to the expense of developing two differnet items for a car that had a limited existance.

I'm yet to confirm this for the non-turbo manual 5 speed, as I don't have access to one to check out.

Also R34's use top-feed injectors for the whole range..from RB20, RB25 to RB26...yet another strange thing.

Dan

Link to comment
https://www.sau.com.au/forums/topic/29202-strange-things-about-r34s/
Share on other sites

666DAN - Our GTT's (RB25DET) use side feed Injectors, not top feed (see Here) and, at the moment, I can only find one injector upgrade (Nismo 480cc) because they're some kind of special plastic version and therefore R33 ones won't work! (unless you change the fuel rail and/or the resistor packs)

PS

Here's a piccy of an RB20'd R34

bubbleoct0307.jpg

MY old GTS was powered by an RB20E. It wasn't that bad! It wasn't good either, but it was a skyline and it was cheap. So, if I had to guess why Nissan made the Skyline range available with a RB20E I'd say to reduce the cost of the entry model to appeal to more people.

The surprising thing about the skyline is tha although it's a kick-ass sports car, it's also a 4 door family sedan that Grandpa Joe likes driving around in...and granpa Joe usually doesn't care how many cams are under the bonnet... :(

There is actually a name for those rb20e R33's, but i cant remember what it is.  I think it started with "E"  Someone who had one should know.

Nissan Skyline "Extremelyslowcarthatlookslikeasportscar"?

But Nismo only supply top-feed aftermarket injectors for the R34 series, as they are the only direct replacements for the factory rail...which is top-feed....go have a look, I've even taken my one out. YES R33 RB25's use side feed...not the R34.

Check this out...

Nismo injectors http://www.takakaira.com/asp/template.asp?...MNnJkKkfhGielHg

These are the engines the R34s came out with in 1998

2 DOOR:

Engine Model - - Power output

4WD :

RB25DE25GT FOURENR34-5MT/E-ATx--200PS/6000rpm

26.0kg-m/4000rpm

2WD :

RB25DET--25GT TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg- m/3200rpm

RB25DE 25GT ER34 5MT/M-ATx 200ps/6000rpm 26.0kg-

m/4000rpm

RB20DE GT HR34 5MT/E-ATx 155ps/6400rpm 19.0kg- m/4400rpm

4 DOOR

4WD :

RB25DE 25GT-X FOUR ENR34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB25DE 25GT FOUR ENR34 5MT/E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

2WD :

RB25DET 25GT-X TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg- m/3200rpm

RB25DET 25GT TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg-

m/3200rpm

RB25DE 25GT-X ER34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB25DE 25GT ER34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB20DE GT HR34 5MT/E-ATx 155ps/6400rpm 19.0kg-

m/4400rpm

so are they low or high impendence?

would GTR ones fit?

They're the opposite of the GTR ones but I can't remember which they are (I think it's high)

the only upgrade I could find (from any maker) was the Nismo 480cc ones, but if you alter the resistor pack then you could fit GTR ones I suppose.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...