Jump to content
SAU Community

Recommended Posts

Hi all,

Can someone please confirm if the side skirts and the rear pod bits on the car in the picture are a nismo body kit?

If so, does anyone know how much they are worth new? And how much they have roughly been selling for when used / second hand?

Any info is much appreciated.

Cheers!

post-54322-1255524277_thumb.jpgpost-54322-1255524322_thumb.jpg

Edited by KR4-GTR
Link to comment
https://www.sau.com.au/forums/topic/292035-r34-gtr-is-this-a-nismo-body-kit/
Share on other sites

Hey Chris,

Genuine Nismo gear is very expensive.

Side Skirts $1270 via air or $1100 via sea, Price do not include local GST or import duties.

Rear pods $860 via air or $840 via sea, Price do not include local GST or import duties.

Cheers,

Johno

Hey mate, they look like the Z-tune side skirts and rear pods.

I just bought a set of the skirts and pods from Bodyform Aero in NSW for $580 ($330 sides/$250 rear)

From all accounts I'd heard, Bodyform were the way to go so I took the plunge and gave them a try.

Peter and Allan there were very helpful and quick to respond to emails.

I've written more on here about my experience with them.

http://www.skylinesaustralia.com/forums/in...t&p=4850400

My car is currently in getting them put on, I'll be picking it up after work today so I can provide pics of what it looks like but I'm pretty confident it'll look good.

When I dropped the parts in to DT Panels, their reaction was "Whoa are these genuine? Are you sure?? They look very well made!" haha that brough a smile to my face.

They're either genuine Nismo or Nismo lookalike. Most replicas seem to be made with fibreglass, the real ones are plastic. The side skirts make the car bloody low, I've already had a few decent hits on speed humps, and when I saw the price on replacing them, I decided to get them repaired instead lol

Uh oh haha, I knew it would make it lower but was hoping it wouldn't be too much lower!

Have you lowered your car too Kristian? I'm hoping I can survive my driveway when I get my car back tonight.. the front lip gets a good bashing already at home and I had to take it off!

Yep agree, there is no way mine is driving over a coke can either, unless the can is on its side maybe :whistling:

if it can go over a coke can on its side... its still to high... flat coke can FTW!

Mine are F/G from JSAI. They were as I recall, about $700 for both sideskirts and rear pods.

I had my front splitter body-colour-coded at the same time (but that's on a car which is already black).

Bodyform Aero makes/fits the same. E: [email protected] P: (02)87835446

I was originally going to say that, lol

By the way, Animal Chin is at my place

hahaha.. "i have a friend, his name is animal, dont worry bout his name, he's not a cannibal, he's always happy, he's got a grin... have you seen him..

he's Animal ch-ch-ch-chin!"

ill be there sunday so we'll find him... is johnny rad there too?? dont want to miss his gig... you guys are gelling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...