Jump to content
SAU Community

Recommended Posts

Hello! When i start my engine there seems to be a massive lag, like a semi flat battery. I've checked the battery, and its all fine. its done this since i got it like 2 weeks ago. It also makes a sort of grating sound. My friend suggested it was the turbo having to built up pressure or something, but i think thats b/s lol. Please tell me what you think :D

Link to comment
https://www.sau.com.au/forums/topic/292378-is-this-normal/
Share on other sites

that grating sound is the relay not letting the starter retract from the ring gear. Not a real biggie. I have that sound too esp on a COLD morning.

I just crank her over a few times without starting, then start and usually the sound wont happen.

Link to comment
https://www.sau.com.au/forums/topic/292378-is-this-normal/#findComment-4885986
Share on other sites

that grating sound is the relay not letting the starter retract from the ring gear. Not a real biggie. I have that sound too esp on a COLD morning.

I just crank her over a few times without starting, then start and usually the sound wont happen.

Thanks!! :D

Link to comment
https://www.sau.com.au/forums/topic/292378-is-this-normal/#findComment-4886597
Share on other sites

pretty much every skyline iv checked has been bout 13.3-13.8 volts

connect up a set of jumper leads before going out and buying a new starter

its a 2min job

According to my power fc hand controller my volts are between 14.0 and 14.4, most of the time 14.2

Link to comment
https://www.sau.com.au/forums/topic/292378-is-this-normal/#findComment-4886826
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...