Jump to content
SAU Community

Recommended Posts

Location: Gold Coast, QLD (Ashmore)

Item: Damaged Series 1 '94 R33 GTS-T,

Has been sitting garaged for almost 2yrs

Started fortnightly & driven around the block to keep things running smoothly

Missing Head-lights & front guards

Auto

TEIN Coilovers all-round

GREDDY pillar mounted Boost & Temp Gauges (Running solid 0.8bar)

17" N1 Altia Racing rims - **extremely rare genuine N1 rims** (couple slightly grazed)

Genuine GTR front bar (damaged but easily repairable)

Blue L.E.D dash & Climate Control mod (kit from 666DAN)

3" exhaust, HKS Hyper Muffler

Iridium Spark Plugs (less than 1000k's use)

Pivot turbo timer

Mostly standard, was easily the smoothest mechanically of all the 10-12 i test drove when purchasing

....... Thats all i can think of so far.....

Sold "As Is", Damage is reasonably minor, besides the obvious of guards & head-lights missing any repairs

if buyer is not pulling the vehicle apart would include..

Both passenger & drivers headlight area need panel-beating back to normal to have flush fit of guards & head-lights.

Passenger door has minor grazing - can be repaired or replaced depending on fussiness.

Extreme passenger-side corner of bonnet under windshield very slightly bent.

2 Wheels need minor repair - filing, filling, sanding, re-painting or powder-coating.

Somehow over the past fortnight, the car has picked up a 'hunt' at idle once warmed up,

I haven't looked into it but am assuming its a vacuum leak from a perished hose - Has smooth start-up before warmed up.

Drivers-side sway-bar link slightly bent (small uni-joint joining bar to chassis)

....... Thats all i can think of so far & should be it.....

Will also add before anyone query's - The GTS Decal on the back WAS a GTS-T decal,

I removed the '-T' to give a more 'sleeper' feel to it. Alot of cops assumed it was

non-turbo thanks to that tiny little "mod". I didn't get asked to '"Lift the bonnet son"'

anywhere near as much after removing it :laugh:

Reason for Sale: Just had a little one, so looking to start a trust-fund for the little guy. :D

Have no use for a turbo 2-door sports-car anymore :D

She who must be obeyed, now insists on a 4-door family oriented car :)

Price & Payment Conditions: $3k or nearest reasonable offer..

Contact Details: Jasyn.. Mob - 0406 197 226, call anytime after 2pm to 9pm. Please MSG/TXT outside these hours

Definitely serious buyers only !! Please do not ask if i will strip it, i'd like my garage space back :D

Cheers for looking.

post-38450-1256290446_thumb.jpg post-38450-1256290481_thumb.jpg post-38450-1256290494_thumb.jpg post-38450-1256290511_thumb.jpg post-38450-1256290563_thumb.jpg post-38450-1256290580_thumb.jpg post-38450-1256290606_thumb.jpg post-38450-1256290650_thumb.jpg post-38450-1256290675_thumb.jpg post-38450-1256290703_thumb.jpg post-38450-1256290736_thumb.jpg post-38450-1256290766_thumb.jpg post-38450-1256290782_thumb.jpg post-38450-1256290800_thumb.jpg post-38450-1256290819_thumb.jpg post-38450-1256290853_thumb.jpg post-38450-1256290867_thumb.jpg post-38450-1256290881_thumb.jpg post-38450-1256290902_thumb.jpg post-38450-1256290946_thumb.jpg post-38450-1256290970_thumb.jpg post-38450-1256290988_thumb.jpg post-38450-1256291007_thumb.jpg post-38450-1256291025_thumb.jpg post-38450-1256291051_thumb.jpg post-38450-1256291075_thumb.jpg post-38450-1256291093_thumb.jpg post-38450-1256291114_thumb.jpg post-38450-1256291136_thumb.jpg post-38450-1256291161_thumb.jpg post-38450-1256291183_thumb.jpg post-38450-1256291205_thumb.jpg post-38450-1256291228_thumb.jpg post-38450-1256291251_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/293243-damaged-94-r33-gts-t-si-3k-ono/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...