Jump to content
SAU Community

Recommended Posts

Hey guys, I gave this a quick search, though I wasn't sure as to what forums I'd find an answer in, nor was I sure what to search for exactly lol.

This is (as of about 6 months ago) my car:

http://www.skylinesaustralia.com/forums/R3...ht-t242518.html

That FS thread gives a decent list of all current mods/parts on the car, and the only things I've done to it since I got it is steering component replacements (tie rod ends etc) and all exhaust gaskets from the manifold back. No performance upgrades.

Now that I've had those 2 repairs done it it, I'm looking to build it up a little. Currently making 167.7rwkw @ 11psi on a mainline dyno.

Unfortunately due to my inexperience with modifying cars, I'm unsure what do start with. I have a good idea on what to do overall, but not what to do first. This is where I'm hoping some of you guys can help out a little :(

As the car is technically a daily until probably around March next year (when I move out after overseas trip), I don't want to go TOO far and have something that's not worth putting the kms onto. I'd like to aim for anywhere between 220rwkw - 250rwkw until this time.

Any suggestions as to where NOT to start would also be much appreciate if you can't put in any input as to what to do first :(

Thanks guys :D

Link to comment
https://www.sau.com.au/forums/topic/293715-looking-to-begin-further-mods/
Share on other sites

Oh? Interesting. I'd thought maybe a little more than that would be needed, but that's probably good! What kind of $$$ am I looking at for something like a Vipec? And any particular brand for injectors?

sard or nismo injectors and a Vipec or second hand PFC and a tune and you'll get 230-250rwkw no probs. So around $2.5-3K and your there. Not sure about the exhaust either?

But easy mods really.

  • 1 month later...

ok so bumping my thread...I haven't had the time to organise any mods as yet, but after having it run on the dyno to investigate a few odd engine sounds that only appear under load (gas leak sound ~2400rpm, whistle sound ~3500 - 5000rpm) and being told that the mechanic couldn't replicate any of the sounds, but not to worry about them as they won't be something vital (ie. cat could be bung, BOV could be leaking under full boost)...

The upside of this dyno run is that the CAS was out, causing retarded timing. Not sure how many degrees it was out by, but after lining it up correctly, the car made 190.8rwkw @ 184kp/h - like I said, same mods as above...

Any rough ideas on what power figure I could achieve with Injectors, pump, and Nistune? Still aiming for 230-250rwkw, but after having seen power increases from some other people's runs, I got no idea what to expect haha

Thanks again oh-knowledgable ones :)

  • 3 weeks later...

Hey troy, as it was my car, and I had the same thoughts as you, I was told to go with a decent set of injectors and ecu.. Rb25 AFM's work well for the power you are wanting to acheive, so I would suggest a Power FC, they are readily available second hand, and they are a cake-walk to install and tune.

Therefore my suggestion would be in this order.

Power fc

Injectors

Full service

Tune

See where youre at when this all goes down and you should be good for what your chasing.

Then stage two would be imo.

Turbo upgrade

Cooling system revised, including radiator, and oil cooler

Air intake system revised, AFM and CAI

Re-tune

This would see the car becoming quite a scary and fun little street car for what it is..

Really it all comes down to the specs of that highflow turbo and what power it will make. Any information on what company highflowed it? Will give you a better indication of what power it will most likely make and how far you can push it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...