Jump to content
SAU Community

Recommended Posts

Hey guys

Reeeeall stupid qusetion and i cant find it no where

What is the exact sparking mesurement for the spark plugs (RB20DET)

Iv found n bn told 1.0mm

1.1mm

0.08mm

I had them all at 1.0mm and it was missing as i was coming on boost fairly mild

took them out made them bit smaller roughly 0.9mm and its running a hell of a lot better now top end high revs is missing???

Sooo im thinking its smaller again!

Just so i dont have to take it apart again, What u guys reckon

Cheers

Edited by MYCEF3
Link to comment
https://www.sau.com.au/forums/topic/293895-gapping-point-spark-rb20det/
Share on other sites

Cheers KISIN! Yeah i found that, but the answer that person gave "Ummmmmm i reckon..... roughly 0.08mm" (WOW convincing much)

Which yeah i wanted to ask yous n find out EXACTALLY the messurement

0.8 not .08 sorry typeo!!

and yeh standard for RB25s as well.

Hahah thats what i ment as well!

0.08... That would be a very tight spark :P (haha... tight.... :thumbsup: )

Edited by MYCEF3

With an N/A engine 1.1 is the standard and that is what most plugs are out of the box.

With a force inducted car you get away with what you can but most people will run around the 0.8 mark.

Also be careful with platinum plugs (which i will never use unless i own a car which is a bitch to change plugs) not to touch the electrode as the platinum coating is only a few microns thick and if you push a screw driver in their trying to gap a plug you will ruin it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...