Jump to content
SAU Community

Recommended Posts

ok so im due to go overseas soon and wont be driving my car for atmost a month.

should i get someone to turn the car or the engine on once in a while during the time i am gone? or dont need to?

whats the main theory behind this anyway? :thumbsup:

Cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/
Share on other sites

Hey Ogz,

The main reason why people get other people to run the car once a week while their gone is to keep the battery charged up. While you are not using your car, your alarm system, clocks etc are still running. Most people will just get someone to turn on their car, leave it in idle for about 5-10 minutes once a week.

That being said, I've left my car untouched for two weeks, coming back from Holiday and the car started without any issues. But that also depends on the condition of your battery.

The other thing I've heard people do is just unplug their battery before leaving, this will stop the car from draining it while you're gone.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4908719
Share on other sites

Your battery might die in a month if you don't have the car started weekly, or you could just disconnect it.

Also, I think your fuel might start deteriorating, anyone feel free to correct me on that :thumbsup:

Ogz beat me to it, haha

Edited by GoldV35
Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4908722
Share on other sites

i think you should just unplug your battery as well while you are gone.

+1

I've done a couple of 1-2 month stints away and this seems to have been the best bet. I also removed the battery and put it elsewhere just to add to the challenge of potential theivery. It won't stop anyone, but it will make it harder.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4908731
Share on other sites

ok this may sound stupid...but if you have the battery out and the car locked....when u next open the door with the key ...with no battery the window doesn't drop...will that potentially wreck the window or the a-pillar?

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4908890
Share on other sites

good point, but i think if only done it once won't be a problem. or you should wind the window down A bit.

That's a good point. You can make sure your door is open when you disconnect the battery, that way the window has already come down the specific amount. When you close the door to lock up, it won't go back up as the battery is already disconnected. Hopefully your window won't be open too much to allow dust etc to get in.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4908976
Share on other sites

good point, but i think if only done it once won't be a problem. or you should wind the window down A bit.

Yes good point indeed. Havent had to think about it with the 35 yet, my experience was all with my old R33. Ah the simplicity (comparatively!)

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4909085
Share on other sites

I had like 6-8 weeks before, no issues... and that is on my old R33 which at that time had a 10 yr old battery original from japan.

if you're worried, yeah just disconnect the battery. I would close all window, pop bonnet, close all doors, lock it, and disconnect the battery, and leave the boot lid down so you can lift it back up without having to worry about the window glass gets clipped over the top by opening the door without power.

it's better than leaving the window open for spiders, etc to crawl into your car while you're away 4 weeks. you'd be amazed how fast they can colonise your interior in a day or 2, let alone 4 weeks.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4909618
Share on other sites

If the car will be parked in a garage near a power point, plan C is to buy a trickle charger and leave it plugged in to mains.

Your car will still be secured with an active immobiliser, you won't lose your clock and radio presets, and you don't have to worry about breaking glass.

With some of them, the leads are long enough for you to be able to run the wires out the grille so you can leave the bonnet latched as well.

I've left my Z33 unattended for 3 weeks with the battery disconnected, and the car started up first go when I plugged it back in.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4910095
Share on other sites

yeh i think i might just leave it, it should be okay since the battery is not that old. car will have a car cover while kept in the garage. thanks for the pointers, if ill be gone for more than 4 weeks i will disconnect it next time.

so in conclusion, the main point is the battery so nothing got to do with the engine side of things? (im still keeping your word Gold! hehe)

anyway thanks again.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4910154
Share on other sites

rs73 is on the money

i just came back from 1 month overseas

and i d/c the battery, left the hood closed, but not fully closed.

when i came back from os i just lifted the hood and i plugged the battery in.

no issue with the window clipping.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4910221
Share on other sites

You see the 350z Battery and V35 from Japan battery size are totally different. The AU 350z have larger battery and the V35 have smaller battery which is typical japanese on all their cars.

Therefore the 350z hold the battery longer than the V35 can.

Link to comment
https://www.sau.com.au/forums/topic/294173-your-opinion/#findComment-4910328
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
    • Yea, that is what I was getting at in my ramblings too. The nismo one actually is a 1.5 way and a 1 way. They don't do a *2* way because a true *2* way would have equal ramp angles. Or is that a true 1.5 way? Realistically I think a "1.5 way" does not actually exist. A diff can either lock in two directions or one. It also doesn't help that a LOT of people in Australia speak about 1.5 way diffs are referring to their 1 way diff.
    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
×
×
  • Create New...