Jump to content
SAU Community

Recommended Posts

Needed to make some room so have to sell my parts.

Located in adelaide.

Reasonable offers considered, but the prices are already cheap so don't be a dick.

Advan Model 5 Wheels - f:18x8 r:18x9. 5-stud, offsets are +35. No gutter rash! Come with shit tires. - $950 Bargain!

HR31 JDM Projector headlights. - $200

Seats, Bride/Recaro style copies. Like justjap sell. Pair in black, pretty much new condition. -$100 pair!!

Garrett T51 turbo. Plain bearing core. T6 flange 1.2 A/R Good for 1000hp. BRAND NEW! - $800!

S13/R32 rear coilovers. HKS Hypermax Pro. 7kg/mm springs. Good condition. -$300

R32 RB20det engine (good condition) All sensors/parts included minus - No turbo, no clutch or gearbox. -$850

VG30 turbo on modified rb20 manifold with external gate/screamer pipe setup. Manifold, turbo, wastegate and dump for only - $350!

R32 RB20det engine loom. $150

Or you can get the rb20det engine with vg30 turbo setup and loom together for -$1100 Bargain!

Everything is in great condition. All the parts are at Japanese Performance Imports if anyone wants to go have a look.

Or call me: 0434 637 357 -Jeff

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Garrett T51 turbo. Plain bearing core. T6 flange 1.2 A/R Good for 1000hp. BRAND NEW! - $800!

could you please post some photos of the turbo?

*edit*

dont worry, as said on the phone, ill buy :(

Edited by Tocchi
Pics on R31 JDM Projectors please, any damage?

Yes the drivers side one was broken at the rear plastic part where it mounts to the car.

But i had it repaired and used it in my car for a long time with no problems.

The glass and lenses and internals are all good. I will get pics.

I have had a lot of requests for pics for everything and i am trying to sort it out.

Should have some pics up later today.

Cheers

ha ha that is the best avatar picture i have seen in a long time.... took me a while to even realise what it was but it's brilliant

Can't seem to edit my post... but these items are SOLD and no longer available.

T51 Turbo

VG30 turbo/manifold/gate

Picture of the seats. Driver side has cefiro rail. Passenger has R31 rail.

They have sat in the shed for a year and are a bit dusty but it wipes right off.

post-32516-1257377387_thumb.jpg

Pictue of headlights. Also a bit dirty.

post-32516-1257377504_thumb.jpg

Picture of Advan wheels. Forgot to mention they are painted black.

post-32516-1257377785_thumb.jpg

Cheers.

hey jeff

VG30 turbo on modified rb20 manifold with external gate/screamer pipe setup. Manifold, turbo, wastegate and dump for only - $350!

is the gate setup on the manifold? willing to sell that on its own?

Cheers

can you post up a pic of the hipermax's dude. they are 7kg/mm? i need em for a 32gtr, but i think the gtr's spring rates were 8kg/mm. post a pic up anyway dude, one of my rears is leakin bad so i will prolly take em anyway.

cheers,

andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...