Rb25 Injector Seals

[Shiraz200SX]

I have a customer that bought an Autotechnica Plenum PN#PMRB25 from me, and a workshop is trying to fit it, and the injector rail when bolted in is as loose as a cock in a sock.

Does anyone know the genuine part numbers or know an aftermarket company that makes/supplies them?

Cheers,

Clinton.

[discopotato03]

You have two sets of O rings that seal the injector in the rails well and large washer shaped ones to seal the rail to the manifild itself .

Genuine Nissan for S2 R33 GTS25T .

"O-RING HOU LWR" - 16618 - 53J00

"O-RING HOU UPR" - 16618 - 10V05

"INSULR F/INJ.LWR" - 16636-72P00

Also insulators that fit under the screwed down steel caps .

"INSUL F/I UPR - 16635 - 53J00

These came through John Robinson Nissan Rockdale in Sydney .

I believe these are correct but check before you buy , Cheers Adrian .

[Shiraz200SX]

sweet. i'll fax nissan the part numbers tomorrow and get them to price them for me.

Cheers for your fast reply.

[Buraz]

Injector seals from Nissan are very expensive, I called up recently for a set for my GTR and they were very expensive. I found them from EFI Hardware for something like $2 each and they have anything you need injector related. Just to let you know if you want to save some money.

www.efihardware.com