Jump to content
SAU Community

Recommended Posts

Hi all.

Could anyone check over my map please and see what you think? I have the datalogit file and in excel format as well.

I have:

Apexi Induction

FMIC

0.85 bar boost

Straight through exhaust

The car runs nice but occasionally gets quite high knock (around 32ish) so wonder if any of you pros could look over it??? Also could you make sure my settings are ok???

Feel free to use the map on your cars as well.

Really appreciate it guys.

Alex

Alex_Stage_1_actual_map.txt

PFC_setup_stage1edit.xls

Edited by d-ranged

your map had heaps of holes in the fuel map (see left picture) and was not real smooth in the load area for timing, try this i tweaked it (see right pic) :P It should use less fuel and feel way smoother to drive, i did the timing map too.

I reckon now you try adding 2 degrees to thr whole map ive posted, check for det though.

The 32 you were getting is no biggie.

It is still not perfect but is much better, I have a few killer pfc tunes for a r33 i'll chase up (on my toughbook tuner) if you want to try it as your overseas.

Alex_Stage_1_actual_map_edited.txt

post-34927-1257679069_thumb.jpg

post-34927-1257679085_thumb.jpg

Edited by URAS
  • Like 1

Wow thanks alot mate i really appreciate that. I wouldnt mind trying out the other maps you have as well if thats ok?? I use the car as a daily driver so i can give some decent feedback if needed.

Do you mean add 2 degress to the map through inj/ign correction? or somewhere else? Sorry im a serious n00b at this and still learning.

One thing i also noticed with my orginal map is that the injector duty was hitting between 92 and 100% was that because of the dodgy fueling or is that something else? I also forgot to mention i have a walbro 255lph fuel pump as well.

Thanks again mate!

Alex

Edited by d-ranged
please list your mods, i have 3 nice ones for std turboed R33's. Whats your email?

My mods are:

Straight through exhaust

FMIC

Walbro 255 Fuel Pump

Apexi Induction Kit

Boost set at 0.85bar

Standard turbo

My e-mail is [email protected].

I have been getting high injector duty (around 92%) at higher revs in 4th and 5th gear is that anything to worry about?

Thanks mate :thumbsup:

Edited by d-ranged
How did the new map i post go?

Really good mate, never felt the car as powerful as that before and was only getting between 22-30 knock, injector duty was hitting around 92% though and I have been told this is quite bad??

Edited by d-ranged

see what inj duty you get at peak power under high load on a cold night, if doesnt max them then it'll be alright. i was just touching 100% on my stock injectors on freezing mornings at only 185rwkw

Well im in the UK so its always pretty cold lol especially in November.

I took it out on Sunday night to sort the boost controller out and it was damn cold then and foggy to. The max duty we saw was 92% at 0.86 bar peak at 5-6k rpm in 4th gear.

Well im in the UK so its always pretty cold lol especially in November.

I took it out on Sunday night to sort the boost controller out and it was damn cold then and foggy to. The max duty we saw was 92% at 0.86 bar peak at 5-6k rpm in 4th gear.

its passable@ 92% just leaves minimal head room. I am emailing a map to you now to compare :happy:

  • 6 years later...

Hi there mates do you guys know the latency for r33 top feed 850cc orange denso injectors?

I am reading these topics cause i am trying to understand how to map my rb25det pfc d-jetro ecu cause where i live no one knows how to remapp an apexi. The tunners here only deal with motec haltec or AEM ecu.

If you guys can help me with this issue will be much apreciated thanks

Edited by pedro skyline

Thanks was what i saied but they saied that they Never Done an apexi and they dont want to take the risk. About the fórmula i found it but it doesnt say what latency are they rated. I even found a injector chart but no densos orange 850cc top feed

Thanks was what i saied but they saied that they Never Done an apexi and they dont want to take the risk. About the fórmula i found it but it doesnt say what latency are they rated. I even found a injector chart but no densos orange 850cc top feed

do they have the laptop software? if not go somewhere that does

I'm just going to chuck this out there because it hasn't really been mentioned - Trent, you're a top bloke for helping out with the map above. That is really awesome of you. I don't know many tuners who would help out like you did. Keep up the good work!

  • Like 2

Thanks for your help. Very much apreciated. This fórum is realy a most with very good People and happy to help. I will logo my datalogit to my pfc and aply those numbers to the fuel injectors sheet on my pfc d-jetro. Thanks i will let you know how was it after that whith the mixture. As long as doesnt knock much and doesnt run lean i will be ok

Edited by pedro skyline

Thanks mate for your help. Very much apreciated. This fórum is realy a most with very good People and happy to help. I will logo my datalogit to my pfc and aply those numbers to the fuel injectors sheet on my pfc d-jetro. Thanks i will let you know how was it after that whith the mixture. As long as doesnt knock much and doesnt run lean i will be ok

Edited by pedro skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...