Jump to content
SAU Community

Recommended Posts

update. ok i've got that damn bolt off now, used a long pole for extension and it finally came off. the shock is still not coming off, i've sort of moved it half way out, not i can't get it out and can't get it back in. is there anything else i need to do?

thanks for the replys guys. didn't finish it in time, so drove my mums car to work :D

only have to put it all back in now, already changed the shock absorber. bit worried about getting it back in as i had enough trouble just trying to take it out! gonna have to try some of the tips suggested. for any beginners out there wanting to change the shocks urself, i advise you to read all the tips!

cheers

ok getting the shock back on the car is even harder than taking it off!

i was afraid of this, was so hard to get off, now its even harder to get it on. i need to compress it like 4cm to get it on.

i don't have a small enough jack to fit underneath there.

blind_elk can u give us a bit more info on ur idea?

thanks.

yep, i've tried pushing the axle down, it helps but still can't get it on!

my poor baby is currently offline until i can fit it back on!

btw, i have spring compressors, but u can't use them to fit the shock back onto the car as there is not enough room there for them. are u suppose to still clamp the springs and keep it on wen u fit the shock back on?

thanks

Jacks are the best way. If you don't have one, get yourself a trolley jack, they are really useful. Use it to put the car up on axle stands, then when it's on the stands, pull the jack out and use it to jack up the shocks. It's really easy once you do a few. Everytime you do them you just get naturally better at it and therefore quicker.

Hey JimX, i've tried to use the jack to jack up the shock, but theres really no room there for the jack. the axle etc are blocking the way to jack the shocks?

When you say trolley jack, u just mean the ones with wheels on it correct?

Sorry for the dumbass questions! This is VERY urgent atm as i've given up on it until someone has some new ideas which i can try. In the meantime i have no car :D

Theres no need to have the spring compressors on when u are putting the shocks back into the car right?

I'll upload some more pics tomorrow.

Bl4cK32, i am thinking! im thinking of who i can call to help me out! lol.

i want the axle to go down, not go up. if it goes up it makes the gap even greater and it will be harder to put on. any other ideas? i really hope this thread is closed soon.

heres a pic of the current situation.

There is more than enough room to jack the shock up if the car is up on axle stands. And by trolley jack, yes I do mean the ones with wheels :) You just need to push the shock up in a kind of next-to position to the stud, and then kind of slide it over. It's pretty easy once you get it into the right position, which can take a bit of fiddling.

You don't need a spring compressor but it might help if you can't do the jack trick. Keep in mind that new shocks are pretty hard to push up on their own anyway so you might need the jack regardless.

Turn the spring compressors upside down and squish the springs while you put the struts in. Then undo them when the strut is in place.

If you can't fit the jack in, it should be easy enough to use brute force to pull the suspension arm down a bit while pushing upwards against the shock and slide it onto the stud.

The more I think about it, the more I think I just used the jack for the rear and just used brute force for the front (no spring compressor for me).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...