Jump to content
SAU Community

Recommended Posts

update. ok i've got that damn bolt off now, used a long pole for extension and it finally came off. the shock is still not coming off, i've sort of moved it half way out, not i can't get it out and can't get it back in. is there anything else i need to do?

thanks for the replys guys. didn't finish it in time, so drove my mums car to work :D

only have to put it all back in now, already changed the shock absorber. bit worried about getting it back in as i had enough trouble just trying to take it out! gonna have to try some of the tips suggested. for any beginners out there wanting to change the shocks urself, i advise you to read all the tips!

cheers

ok getting the shock back on the car is even harder than taking it off!

i was afraid of this, was so hard to get off, now its even harder to get it on. i need to compress it like 4cm to get it on.

i don't have a small enough jack to fit underneath there.

blind_elk can u give us a bit more info on ur idea?

thanks.

yep, i've tried pushing the axle down, it helps but still can't get it on!

my poor baby is currently offline until i can fit it back on!

btw, i have spring compressors, but u can't use them to fit the shock back onto the car as there is not enough room there for them. are u suppose to still clamp the springs and keep it on wen u fit the shock back on?

thanks

Jacks are the best way. If you don't have one, get yourself a trolley jack, they are really useful. Use it to put the car up on axle stands, then when it's on the stands, pull the jack out and use it to jack up the shocks. It's really easy once you do a few. Everytime you do them you just get naturally better at it and therefore quicker.

Hey JimX, i've tried to use the jack to jack up the shock, but theres really no room there for the jack. the axle etc are blocking the way to jack the shocks?

When you say trolley jack, u just mean the ones with wheels on it correct?

Sorry for the dumbass questions! This is VERY urgent atm as i've given up on it until someone has some new ideas which i can try. In the meantime i have no car :D

Theres no need to have the spring compressors on when u are putting the shocks back into the car right?

I'll upload some more pics tomorrow.

Bl4cK32, i am thinking! im thinking of who i can call to help me out! lol.

i want the axle to go down, not go up. if it goes up it makes the gap even greater and it will be harder to put on. any other ideas? i really hope this thread is closed soon.

heres a pic of the current situation.

There is more than enough room to jack the shock up if the car is up on axle stands. And by trolley jack, yes I do mean the ones with wheels :) You just need to push the shock up in a kind of next-to position to the stud, and then kind of slide it over. It's pretty easy once you get it into the right position, which can take a bit of fiddling.

You don't need a spring compressor but it might help if you can't do the jack trick. Keep in mind that new shocks are pretty hard to push up on their own anyway so you might need the jack regardless.

Turn the spring compressors upside down and squish the springs while you put the struts in. Then undo them when the strut is in place.

If you can't fit the jack in, it should be easy enough to use brute force to pull the suspension arm down a bit while pushing upwards against the shock and slide it onto the stud.

The more I think about it, the more I think I just used the jack for the rear and just used brute force for the front (no spring compressor for me).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...