Jump to content
SAU Community

Recommended Posts

hey guys got a feb 2001 nissan stagea c34 rs four s,last of the c34 and also factory manual with alot of rare options from factory,if your genuinly intrested send me email or sms and ill send u decent pics of the car............$18,000 ono with 12 months rego

0447593003

[email protected]

my name is brenden and car is located in orange nsw,feel free to make appointment to view car(genuine buyers only please)

rego runs out on the 27 nov and wont be geting registered for a couple of weeks after that as only just starting new job so in this time u can get it cheap and while it is standard as i have big plans for it for when i have money lol so get in now.

this stagea is completly standard with only mod bein 3inch exhaust but retains all standard mufflers and cat so is still silent

206kw neo rb25det

5 speed manual

awd/aws hicas

rear diff is machanical lsd(factory issue)

124,500kms

unique factory body kit some of whitch is only on 2001 c34 stagea

pearl white

factory 17 inch wheels

twin airbags

momo steering wheel

gtr inspired,volts,front torque,boost.

autech interior(factory)

factory stagea mats

xenon head lights

tyres 70%

big kenwood stereo

seriously smooth power on factory boost(5psi roughly)neva eva been boosted

recent service

as i only drive around town and a small town iv only put 1100kms on it and has had 2 services in that time

post-64841-1257671188_thumb.jpg

post-64841-1257671245_thumb.jpg

post-64841-1257671303_thumb.jpg

post-64841-1257671364_thumb.jpg

Edited by deceiver33

u can also find on carbuddy.com.au

here is the link

http://www.carbuddy.com.au/nissan-stagea-r...car/160498.aspx

post-64841-1257742351_thumb.jpg

post-64841-1257742435_thumb.jpg

post-64841-1257742586_thumb.jpg

post-64841-1257742714_thumb.jpg

post-64841-1257742892_thumb.jpg

post-64841-1257743366_thumb.jpg

post-64841-1257743412_thumb.jpg

Edited by deceiver33

wouldnt mind swaping for a series 2 vt ss or vx ss or possibly vy ss also,i just want to get back into v8s and i no longer need the stagea as have purchased another wagon for the kids

price is negotiable guys

may also be keen to get back into oldskool vk or vh sle built not a crappy rust heap

Edited by deceiver33

really depend wat u have as i swaped my r33 for this as i was just sick of my skyline

just checked ur topics mate and nar probly give it a miss thnx ne way

Edited by deceiver33

0488593000 txt me or ring or 02 53106380 im located in orange nsw.price is neg guys make an offer and please leave me feedback tell me wat u think

price drop $14,000 this is a bargain as u wont find the same at this price,sale only no swaps,rego ran out last night so get it cheap while u stil can 0488593000

Swap for my clean stock 180sx Type X Black 1996 model?

http://www.skylinesaustralia.com/forums/Bl...-S-t296263.html

5 stud conversion and Jap two piece rims and coil overs and ganador electric mirrors( not cheap non electric ones)

hey mate normally i would say yes but the car might be sold thru ebay,but just incase he doesnt come thru then ill pm you as im keen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...