Jump to content
SAU Community

Recommended Posts

Hi,

(mods please advise if this is in the wrong place)

I've just got back from Japan and I went to the Nissan HQ in Yokohama. Saw the Z's and an awesome bunch of cars on display. I also went nuts in the shop and picked way too much stuff.But thinking of the forum I've got a few items to sell as well:

model1.th.jpg

1. Stagea Model - Nissan Gallery Global Headquarters

The bottom of the case reads:

Nissan Stagea 300RX (Red)

Comes in a plastic cover which has a skyline (pun huh?) and then it's in a hard clear plastic case mounted on a textured base which has the nissan logo and the word Stagea printed on it. Theres a mirror to show off it's tail. It's a nicely detailed metal model. I bought one for myself too.

Price: $50

model1a.th.jpg

2. Keyrings

2a. a metal engine cover with the Nissan logo and a big V6 on the front, single word Syline embossed on the back. I beleive this is for the Z34 but it works for me for my stagea even though it doesn't have the turbo on it.

Price: $40

2b. same metal engine cover but with a channel cut into it and the V6 with a smaller 3.5 under it (one for the V or Z boys)

On the back it has the Nissan Z letter.

Price: $30

3. Pins

3a. A GTR badge pin. In a clear case in foam. In Japanese on the package it reads: GT-R BCNR33 and japanese words :P

Price: $20

3b. the simple, beautiful Skyline badge pin. Silver edging and white filled letters.

Price: $20

I've tried to take good pictures but these are still in the packaging and I'm loath to open them. If you need anymore pics let me know and I'll see what I can do.

Postage will be at cost to where ever you are.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...