Jump to content
SAU Community

Recommended Posts

I have heard that the S-AFC will not allow use of the Z32 AFM on the R33 GTS-t, I am curious to know if it has worked for anyone.

I know that the S-AFC allows use of the Z32 AFM on s13/s14 SR20's so I do not understand why it would not work on R33 GTS-t.

Cheers.

_Justin

Link to comment
https://www.sau.com.au/forums/topic/29600-using-s-afc-on-z32-afm-on-r33-gts-t/
Share on other sites

yeah i have not experimented myself but have heard a fair few reports that it didnt work. i also have an SAFC II and was going to do it, but have been told its virtually impossible to get a good tune that way, there were problems with idle etc. unfortunately your ECU cant be chipped to accept the Z32 AFM. as thats what im doing now.

The system used is the same as the PFC selection. I'd say comments that it does not work would be perhaps related to other issues including buying second hand Z32 AFMs that are rooted.

Considering both versions of the blue screen AFC do this function, if it didn't work I doubt they would bother with a re-release of the function (disfunction).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...