Jump to content
SAU Community

Recommended Posts

Hi guys

Not sure if i posted in correct section, but my ODO seems to be reading incorrectly for the traveled KM's

I've tested it this week and so far half tank has gotten me 78KMs?

I don't think its my fuel efficiency as my car hardly has anything that would use that much petrol when driving normally

I was expecting at least 150 - 200 on half tank reading but its sitting on 82KM traveled at the moment

Any help would be appreciated

Cheers,

Will

Link to comment
https://www.sau.com.au/forums/topic/296632-odo-doesnt-accumuate-kms-accurately/
Share on other sites

Odometer measures distances, not fuel economy.

Poor fuel economy is often the result of a failed engine temp sensor (ECU thinks the engine is still cold, and overfuels the mixtures).

Other possibility is a dirty air filter restricting airflow into the engine.

Odometer measures distances, not fuel economy.

Poor fuel economy is often the result of a failed engine temp sensor (ECU thinks the engine is still cold, and overfuels the mixtures).

Other possibility is a dirty air filter restricting airflow into the engine.

Yes i know it measures the distance but is it possible for it to read inaccurately?

I will be getting my car checked out this week, will be running it on my mates dyno to see if the ODO matches up with the dyno distance traveled

I'll get the engine temp sensor checked as well, other then that any other possibilities?

Yes i know it measures the distance but is it possible for it to read inaccurately?

I will be getting my car checked out this week, will be running it on my mates dyno to see if the ODO matches up with the dyno distance traveled

I'll get the engine temp sensor checked as well, other then that any other possibilities?

What I'm saying is that just because you have used more fuel than you expected to use doesn't mean the odometer is inaccurate. Presumably it has been accurate until now, so there is no reason why it would suddenly become inaccurate.

And it's "other THAN that".

What I'm saying is that just because you have used more fuel than you expected to use doesn't mean the odometer is inaccurate. Presumably it has been accurate until now, so there is no reason why it would suddenly become inaccurate.

And it's "other THAN that".

Fair enough, I'll see how it goes this Saturday

Hopefully its something as simple as the O2 sensor or Engine temp sensor

... but my ODO seems to be reading incorrectly for the traveled KM's

I've tested it this week and so far half tank has gotten me 78KMs?

I don't think its my fuel efficiency as my car hardly has anything that would use that much petrol when driving normally

I was expecting at least 150 - 200 on half tank reading but its sitting on 82KM traveled at the moment

Cheers,

Will

What blind_elk is saying is that there has to be something else other than just the odometer that's at fault.

If you're using up half a tank to get as far as 78Kms, something abominable is going on (according to your fuel gauge + tripmeter + calculations of where you've travelled).

2 faults = 2 different sets of symptoms in this case

What blind_elk is saying is that there has to be something else other than just the odometer that's at fault.

If you're using up half a tank to get as far as 78Kms, something abominable is going on (according to your fuel gauge + tripmeter + calculations of where you've travelled).

2 faults = 2 different sets of symptoms in this case

Yeah at the moment I'm still trying to see what else is going on, taking into account everyone's suggestions as well

I wont know until i have it checked out this Saturday, i just thought it was strange as my driving style hasn't changed and i feel i have traveled more then 80KM this week (Liverpool to Wollongong on Saturday which should have yielded at least 80kms on top of whatever i already had).

But yeah look will keep you guys posted on this.

Thanks for your help

  • 2 weeks later...

Update!

Got it checked out and it was the ODO reading incorrectly (half of what its meant to read)

I just got the SINE WAVE box re calibrated so all is reading correctly.

Thanks for your help guys

Update!

Got it checked out and it was the ODO reading incorrectly (half of what its meant to read)

I just got the SINE WAVE box re calibrated so all is reading correctly.

Thanks for your help guys

Good stuff Grimmjow. Bet you feel vindicated that it WAS the ODO :-)

haha im having the same problem with my stock one, and the speedo is half of what it should be :\ maybe i need to get it calibrated? Dunno getting a new cluster and gear sensor this weekend

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...