Jump to content
SAU Community

Recommended Posts

sorry if i sound like a prick but do you really think a 15yr old engine is going to hold up well? (if u had a gtr would you drive it only to the shop and back? i dont think so the car could have been trash its engine out you dont know)

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Guest darrinspencer
darrinspencer, my point is that the condition of the cars will be very poor, and im pretty sure it isn't worth wasting you money on, as you would need to fix so many things

I agree there are some poor quaility 15 yr old GTR in japan.

Prestige have high prices

A mate of mine bought his 95 33 gtst from them it owed him $22,000 plus rego.

i admit it had a nice aftermarket body kit.

I payed $12,500 plus rego and tyres

Put the cars side by side and the only difference is the body kit.

You need to shop around.

Buying any car thru a Australian dealer you will have pay a price

That's why they are in bussiness.

Guest darrinspencer
sorry if i sound like a prick but do you really think a 15yr old engine is going to hold up well? (if u had a gtr would you drive it only to the shop and back? i dont think so the car could have been trash its engine out you dont know)

we all would like to drive a 34 GTR done 10,000km, but who has $65,000 plus to buy one

I know i don't.

Plus, i drive my GTS-t to the shop and back so if i where to replace it with a GTR YES i would drive that to the shop and back to.... i don't get your point... there are flogged out cars everywhere... there are also good cars everywhere...

this one looks ok... http://www.cineaction.co.jp/japanese_used_...gi?did=10013876

also, i'd never want a car that's only been driven to the shops and back because once you give it a bootfull the piston rings etc are gonna go "oh my god, i've never been worked this hard in my life, bye bye!!!"

ok DJ984 im not going to post in this topic anymore, becuase you don't understand the point i am tring to make, you are acting like a little child, i am right and you are wrong 13_devil.

"we ARE realistic..." -yeap sure you are, you should all make an importing company im sure you would make a heap

so go ahead buy your 89gtr, i was just tring to help cya

Guest darrinspencer
DJ984, what i was tring to say was that the dream gtr

female driver - driven only to the shops and back low km , top condition for 15k is just a mthy i have never seen such a car

You will in 2004 because you no longer have to comply them at a cost of $6600

plus they are a bit cheaper in japan now and the exchange rate

12 months ago you would have payed about $24,000 for the same car that you can now buy for $15,000 in 2004.

Would paying $24,000 for the same car be any better.

Think about it.

Guest darrinspencer
like i said go ahead buy a 89gtr, and import 100 of them for everyone else and make 200% profit like someone already said

13_devil

I will gladly sell you a car in 2004 for $25,000 if you think you will be getting a good buy because you payed top dollar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...