Jump to content
SAU Community

Recommended Posts

Door Pack is sh*t..really!

Buy the Bulk pack.I did..glad I did.

I think it's actually called the Trunk Pack or something like that.

But yeh, bout half the pack on each side should get the doors nice and stiff to absorb the bass and will give you clean notes.

I don even need a Sub anymore. Got 6x9's in the back aswell!

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4946199
Share on other sites

the skyline doors really sound sooooo much better with lots of sound deadener. like a new car when you close it.

my GTT has innner, outter, and sound mats behind the speakers. and the door panels now have foam filled handles and other sound deadener to stop the squeak between the lower and upper parts when your hip leans on them... annoying !!! plus my door pockets are going to be gone this week and filled up with another pair of splits...

the little packs that dynomat give you isnt nearly enough to do a small door properly, as chris suggested above.

there are a multitude of products that do the job, some better some worse..some you find at Bunnings for next to nothing hint hint

and for all those people who think its too heavy for a street car,clean out your macca's wrappers.... I'd rather my car sound solid built then a rattle can . you can only drive so fast on the roads anyhow? if I wanted a race car I wouldnt put a radio in it...end rant ...lol

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4946942
Share on other sites

personal preference my friend. i usually put some on the inner skin, then line behind the speaker with plain chant, then seal the door up totally, then put a sheet of dynaliner across the whole exoskeleton of the door. www.dynamat.com has some good tutorials on it.

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4949215
Share on other sites

dont overlook some of these videos

http://www.secondskinaudio.com/installation-instructions.php

Dynomat isnt the only company who does this

Stinger is another good one

my car doors are damn near sealed , my two sets of split speakers dont even fire into the door chamber they have separate chambers sealed with carbon fibre and fiber glass molds and custom horns for the tweeters molding into the door panel shell. the sound deadener is for the rattles and to keep the SPL inside the car

(photos will be posted up on Audiocontrols website soon for all to see the build up)

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4950799
Share on other sites

keen to see some horns in a car! don't see too many horns being used in australian car audio.

all to be revealed very soon...lol

Sponsors website when revealed

http://www.sound-better.net/gallery/Show-Offs/Show-Offs.html

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4956927
Share on other sites

  • 2 weeks later...
keen to see some horns in a car! don't see too many horns being used in australian car audio.

they do seem 2 be more populay in the US than Aus, proably cause they are more dificult to install

I've never installed them bet have listened to a few that just sound majic. ( & some that sound poo)

as always the more effert put in the greater the reward

Horn in the door ..... NEVER seen that.. wish I lived in hoonsville 2 have a listen

Edited by BundyBear
Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4973299
Share on other sites

they do seem 2 be more populay in the US than Aus, proably cause they are more dificult to install

I've never installed them bet have listened to a few that just sound majic. ( & some that sound poo)

as always the more effert put in the greater the reward

Horn in the door ..... NEVER seen that.. wish I lived in hoonsville 2 have a listen

Horns cost a fortune for "image Dynamics" or similar, and take a proper designed system to make them sound good, plus a lot more space to mount

there not store brand horns,,,, there very custom hand made ones and yes designed properly up too the point I could , using the space and car audio speakers instead of Pro Audio sound gear for concerts...lol

once the system is tuned I can post the RTA curve if anyone wants or ?

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4974374
Share on other sites

Horns cost a fortune for "image Dynamics" or similar, and take a proper designed system to make them sound good, plus a lot more space to mount

there not store brand horns,,,, there very custom hand made ones and yes designed properly up too the point I could , using the space and car audio speakers instead of Pro Audio sound gear for concerts...lol

once the system is tuned I can post the RTA curve if anyone wants or ?

yea 4got bout the $$$, seem to remember reading a Mag article years ago( b4 the intaweb thingy) about a system with hand made horns (posibley one or the Ausie car audio mags)

damd things always fasin8td me but could never convince anyone 2 let me try'm in their car ( can't blame em really)

P.S. ya probably guest but yep im an X Backyarder, by X I mean I only do MY cars these days ( I like 2 play by my one rules sometimes)

cheers

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4975034
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...