Jump to content
SAU Community

Recommended Posts

As a result of my accident 2 of my rims were hammered.

One has been repaired so now i have 3 and the other doesnt look like it can be saved. The guy from aliance tryed as hard as he could :D

Does anyone know anyone that sell Enkei mags? Or could find the ones im after...

I am after either 1 or 2 Enkei RS Evolutions 17x7

enkei_rsevo.png

Alternatively, I need a new set of mags.

In the meantime I would like to ask all the skyline guys out there if they have 2 mags laying around that I could borrow. Im after 2 17"s just so i can fix up/check the rest of the car. eg. suspension, body work, wheel alignment.

Thanks guys...

Link to comment
https://www.sau.com.au/forums/topic/29727-help-rims/
Share on other sites

ohhh rep my man!! i am stuck mate i kinda need 17s by friday.... so i can get the front bar sprayed and blended to my car...

do you think i could borrow the 2 17s till i get the replacements (3 weeks hopefully less)....

i'll get you a couple of cartons for your trouble.... :(

ps. PM sent rep. :D

Link to comment
https://www.sau.com.au/forums/topic/29727-help-rims/#findComment-607371
Share on other sites

HUGE!! thanks to rep, aka troy. :(:D

the wheels are on the car troy and they look bloody good. mind you they dont fit on the front because our brakes are too big and the offset is JUST to small... it just scrapes the NISSAN part of the brakes....

I took the car for a drive around the block and it doesnt seem to be that bad...i get the front bar back tommorow so that will be the real test because i'll hit 110km/h and then see whether it wobbles. @ the moment there is no movement only a slight lean to the right with the steering wheel...

I am getting a full wheel and alignment and balance done and then i will see what it is like...

the enkei saga is a bit more detailed and i'll let you know when i know anything for definate but im gonna start looking at a whole new set and have the enkei i have no as my drag wheels :( so sad, such a waste!!

Link to comment
https://www.sau.com.au/forums/topic/29727-help-rims/#findComment-611951
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...