Jump to content
SAU Community

Recommended Posts

Do you think these cars are worth it or not???

I currently have a 93 r33 gts with zorst, pod filter, unichip,extractors and tinted windows, and verry sweet mags...

is a gts-4 a better car, or is mine better?...i dont care so much about awd weighing it down, as it would be that much difference!!!

So what do you people think???

The gts-4 im looking at i think is like a 94 model, with 400r kit( i think)

James White.

Link to comment
https://www.sau.com.au/forums/topic/29869-r33-gts-4-questian/
Share on other sites

ok... I used to own one of R33 GTS-4

Its Great car to move around but... its missing a turbo.

if you want to fully RWD than stick with R33 GTS you will have more power due to no 4WD train.

R33 GTS-4 is heavier and less powered

If you live where high rainfall like QLD. then its very useful in the winter and rainy days.

if you are into drifting then stick with GTS RWD.

also it cost arms and legs for conversion, but it can be done :D

if you're going to spend a lot of money doing it up, im sure the RB25DET engine swap would be more practical.

I would go for a R33 GTST over a GTS4 though.

My options are r33 gts(what i have now)

r33 gts-4

Turbo is not a questian right now...as im on my p's

but as soon as i can legaly get turbo i will be so the gts-4 would be better then?

no... sounds like you are over estiamting.

Listen to other people SAVE Your moeny and get a old donga... VN or VX

what ever and wait for your P to get off then

buy a GTST or GTR later...

once you buy a skyline in P's INSURANCE cost you arms and legs and service too...

I know you think WTF but.. skyline aint such good 1st P car.. IMHO

no... sounds like you are over estiamting.

Listen to other people SAVE Your moeny and get a old donga... VN or VX  

what ever and wait for your P to get off then

buy a GTST or GTR later...

once you buy a skyline in P's INSURANCE cost you arms and legs and service too...  

I know you think WTF but.. skyline aint such good 1st P car.. IMHO

Ok ill try one more time.........

I currently have a car...it is a 93 r33 gts but i was looking at mabe getting a r33 gts-4 insted, so therefor selling my car!!!

so you understand now?

Also remember the GTS-4 isnt AWD like a WRX etc

The 4 wheel drive is attessa computed 4wd, same as GTR drivetrain.

Front wheels are only active when the rears are spinning.

Computer controlled 4WD mode as apposed to AWD where all wheels constantly drive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...