Jump to content
SAU Community

Recommended Posts

This is a 1.5 way mechanical LSD diff centre.

Not sure of what the brand is, i took a photo of some of the prints on the centre, if anyone does know can they please tell me.

I took it out of my R33 gtst as im selling the car and figured it would be worth more.

Centre seems to be in good condition, was a tiny bit noisy, had a slight wine at about 80-90kmh

This diff locks both wheels on and off acceleration, its pretty tight.

It has seen one track day at calder park that is it, apart from the odd slide on the streets.

any questions welcome

will post at byers expense

post-37613-1259748094_thumb.jpg post-37613-1259748496_thumb.jpg post-37613-1259748219_thumb.jpg post-37613-1259748747_thumb.jpg

has it got the standard ratio ?

how do you know its a 1.5 and not a 2way?

is there noise because it needs to be re shimed?

thanks.

Sorry for the late reply people. Im not 100% sure that its a 1.5 way however this is what i was told when i bought the car.

Im looking for $400 plus postage

cheers

Its a Nismo diff, (or a standard)

If you grab a photo of this section:

R200NISMOramps.jpg

Its its cut to a diamond shape (4 cuts) its a 2 way, if its just got 2 cuts and is kind of triangle shape then its a 1.5 way.

The one pictured in this post would be a 2 way as it would have 4 cuts, but the shadow covers the top 2 cuts.

Edited by JiN_MaN

I got an e-mail from Daniel, that's about it..

I asked if the standard shafts will fit, because usually Nismo diffs require Nismo shafts to fit. If the stock shafts don't fit I'm out :)

Unless is the last model of the Nismo diff's, Nismo Pro (I think thats what they called them) then your standard shafts will fit be no problem. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...