Jump to content
SAU Community

Recommended Posts

hard to see the photo, but no, its more then likely a airbag wire(normally covered in a red or yellow jacket), seat belt pre-tensioner firing wire, or a seat belt warning buzzer/light wire

do not ground the wire out , or use a test light on it. Digital Mutimeter only, it could be bad !!!!

Not sure what car you have but that would narrow it down , R33, 34 ?

well sounds like I was right,,, if its a pretensioner in the reel , either way I would test it right!!!!!!

never probe with a paperclip,,,, what a tool, lucky it wasnt a airbag... kaboom $$$$$$$$$

never probe with a paperclip,,,, what a tool, lucky it wasnt a airbag... kaboom $$$$$$$$$

I had a bit more common sense than that... for starters, no airbag, so that's not gonna happen, and I tried with a multimeter first to see what I was dealing with. found one side was 12V and the other WASN'T a direct ground, but also wasn't completely open, so it was obviously a switch of some sort. Even if I was about to short something out, it's all fused, so if I popped a fuse, i'd be able to see which one and that would have helped me identify it anyway.

If you had no/very little electronics experience then I would advise against playing around with that sort of thing, but if you're careful and use some common sense it's really nothing major.

Ugh... yes... info would help *idiot*

It's an R32 GTS4 - it's a small black plug with one green wire and one black wire connected to it. It's under the driver's and comes up through a hole in the carpetting.

My car doesn't have an airbag, and no, the seatbelt warning light doesn't come on. But I'm also not sure if I have one. I'll double check that on ACC and see if I have one when everything lights up.

Thanks for the input so far guys

I can safely say your question is answered, its not a speaker plug. and more then likely a seatbelt buzzer or light. push under carpet and forget you saw it..lol

cause we all wear seatbelts,,, dont we ????

and samon, I dont know who is on the other end of forums questions , a pro, complete muppet or someone in between ,,, so to be safe and Professional .... I CAUTION people about what can go wrong before they go probing or wiring things... then blame me for a meltdown because they should have know not to use a paper clip that burns there hand as it glows red hot.... when it gets 12volts and a 30+amps pulled thru it. and when they drop it it burns a hole in the seat, or carpet, or the car just burns to the ground while they watch ?????

I have seen a paper clip used before to BYPASS A BLOWN FUSE,, they do melt just like a fusable link would when they have a dead short to ground and car battery amperage or worse a shorted alternator which is pushing A/C current thru a dead short (backyard fix job by a muppet with a mullet)

also witness someone use it to extend a spark plug wire to see if it sparked on the engine block to the plug in question ..... they kinda got a big shock... 60,000 volts worth as the hi powered racing coil... zapped them from the shorted, innocent paper clip ????? instant stun gun!!!

I can safely say your question is answered, its not a speaker plug. and more then likely a seatbelt buzzer or light. push under carpet and forget you saw it..lol

cause we all wear seatbelts,,, dont we ????

and samon, I dont know who is on the other end of forums questions , a pro, complete muppet or someone in between ,,, so to be safe and Professional .... I CAUTION people about what can go wrong before they go probing or wiring things... then blame me for a meltdown because they should have know not to use a paper clip that burns there hand as it glows red hot.... when it gets 12volts and a 30+amps pulled thru it. and when they drop it it burns a hole in the seat, or carpet, or the car just burns to the ground while they watch ?????

I have seen a paper clip used before to BYPASS A BLOWN FUSE,, they do melt just like a fusable link would when they have a dead short to ground and car battery amperage or worse a shorted alternator which is pushing A/C current thru a dead short (backyard fix job by a muppet with a mullet)

also witness someone use it to extend a spark plug wire to see if it sparked on the engine block to the plug in question ..... they kinda got a big shock... 60,000 volts worth as the hi powered racing coil... zapped them from the shorted, innocent paper clip ????? instant stun gun!!!

here here on the airbag warnig ... once watchedd a guy break his arm in 3 places with a test light

2 this day If im pokn round with even a DMM I still keep my A$$ out of range of the bags

EDIT:pulled bits of 3" nails out of an old jeeps fuse bluck once( battery to bomb 101)

Edited by BundyBear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...